Active Member
|
[China]
Address: Miangyang
Contact name:Michael zhang
Mianyang Prochema Commercial Co.,Ltd.&GUS Industry (Hongkong) Co,.limited |
|
|
FEP ROD
FEP rod is made from FEP resin and prepared by the technology of
extrusion and molding. It can be machined into various sealing
parts and electric components. It can be used at the temperature
range of -80 through +200
application:
1.Petrochemical and chemical processing
2.Electrical applications
3.Semi-Conductor Industry
4.Food, Beverage and Pharmaceutical industries
5.Laboratory applications
Lining Bearing pads, seals, and electrical insulation Lining
Bearing pads, seals, and electrical insulation, liner tube,
insulator tubing.
Note: If you need any products of ours, please kindly contact with us
directly by following contaction . Then we can reply you faster and
easy . Thanks
Characteristic
1. High and low temperature preservation
2. -200~200°C high temperature intensity better than F4
3. No-begriming ,and no-stagnant in tube
4. Security and insulation
5. Under 60HZ—60MHZ high and low temperature , permittivity is 2.1
6. If firing, and will still insulate
7. Voltaic are>165 seconds insulation
8. Erode preservation
9. Under high temperature, fluorin and alkali will reaction with
PFA, no reaction with other acid.
10. Low water absorption<0.01%
11. No firing in air( oxygen index>95 vol.%)
Properties :
FEP | ||
Items | Properties | Indicators |
physical properties | specific gravity(g/cm³) | 2.12~2.17 |
meltingpoint(°C) | 207 | |
melt index(g/10min) | 5~25 | |
electrical properties | tensile strength(Mpa) | 27~29 |
elongation at break(%) | 250~300 | |
rigidity(SH) | D60~70 | |
coefficient of kinetic friction | 0.2 | |
mechanical properties | volume resistivity(CM) | ≥10 18 |
insulated breaking voltage(0.2mm)/(mv/m) | 20 | |
dielectric constant 1MHz | 2.1 | |
dielectric loss angle tangent 1MHz | ≤0.003 | |
It is predominantly used in the constchemicalruction/fabrication of semiconductor wafer baskets, aggressive
baths/wet benches & custom made inert liquid enclosures.
Specification and usage of FEP rod:
| Name | Diameter(mm) | Length(mm) | Application |
| Molded rod | 5-20 | 200 | Anti-corrosion, sealing, antifriction, electric insulating parts |
| 25-100 | 100-150 | ||
| FEP rods are compatible to corresponding standard. | |||
Package :
Plastic bag &carton . Customized is acceptable
