JIAXING VIIPLUS INTERNATIONAL TRADING CO.,LTD |
|
C86300 Manganese Bronze (SAE 430B) is a high strength alloy material used as bushings,
bearings,valve bushes stems and hydraulic cylinder bushing parts.
Straight type Spherical Bush Unit Pillow Bronze Graphite
Bushing Oilless Slide Bearings Manufacturer
C86300 (SAE 430B) Manganese Bronze Bushing, Cast Bronze Bushings,
Manganese Bronze Sliding Bearings Products
VIIPLUS Developed high wear resistance, dust resistance, high strength
self-lubricating bearing, not only solve the problem of lubrication
and reduce the noise to extend the service life, especially in bad
mines, field work equipment, such as excavator big arm bearing,
chassis walking mechanism, hydraulic cylinder oil pump.
Ship bushing by air,DHL,FedEx,TNT,UPS...
Notice: The sliding bearings weights listed are the best estimates
of the actual weights we will ship. They are a combination of the
calculated theoretical weights and an average of actual weights.
Our weights are conservative to the heavier side but there may be
slight variations in weight from bushing to flange bushing or
washer.
Cast Bronze Bearings Injection Molding Machine Bushings,Excavator
Bushes Crane Bushings Loader arm bushing Oilless Metal Sliding
Materials Standard Components for Sliding Bearings Bushes Flanged.
The product is widely used on consecutive casting and rolling
machines, mine-exploiting equipments, ships, steam engine, etc.
Engineering machinery:Especially equipment operating in harsh mines
and fields;Such as excavator arm bearing sleeve, bulldozer copper
sleeve, chassis walking mechanism, hydraulic cylinder oil pump.VIIPLUS developed shock-resistant, dust-resistant, high-strength self-lubricating bearing, which not only solves the
problem of lubrication but also reduces the noise and extends the
service life.
Industrial Machinery Application:VIIPLUS bearings have the
advantages of extremely low maintenance frequency and little or no
oil, plus the performance of reducing running noise, even in the
case of no oil supply, its excellent wear resistance can make the
equipment stable operation, thus providing an economical and
effective solution for the continuous safe operation of industrial
equipment.Nowadays, modern chemical industry is more and more
demanding for high efficiency and high precision. Meanwhile,
environmental protection and safety guarantee have become basic
requirements.
Various material specifications, standard and special shapes are
also available
VSB-50 Solid lubricating bearings
1. May work without any ol for long period
2. Extremely high load capacity, good anti-wear and lower friction
3. Particularly appropriate for low speed and high load
4. Suitable for reciprocating, oscillation or intermittent motion
where oil film is hard to be formed
5. Good chemical resistant and anti-corrosion characteristics
6. Can b€ used in wide range of temperature from -40℃-+300℃
VSB-50 SOLID LUBRICANT SLIDING BEARINGS material is made of strong cast bronze based metal with special solid lubricants embedded. The base metal withstands high load and the solid lubricants provide self-lubrication. The bearing shows excellent performance without pre-lubrication under conditions of extreme high/low temperature with low speed. This material provides a maintenance-free bearing solution, particularly for high load, intermittent of oscillating motion.
The Physical, Fabrication and Thermal Properties shown here
represent reasonable approximations suitable for general
engineering use. Due to commercial variations in compositions and
to manufacturing limitations, they should not be used for
specification purposes.
Grade | 50# | 50S1 | 50S2 | 50S3 | 650S5 |
Material | CuZn25AI5Mn4Fe3 | CuSn5Pb5Zn5 | CuAI10Ni5Fe5 | CuSn12 | CuZn25AI5Mn4Fe3 |
Density | 8 | 8.9 | 7.8 | 8.9 | 8 |
Hardness | ≥210 | ≥70 | ≥150 | ≥75 | ≥235 |
Tensile strength | ≥750 | ≥250 | ≥500 | ≥270 | ≥800 |
Yield strength | ≥450 | ≥90 | ≥260 | ≥150 | ≥450 |
Elongation | ≥12 | ≥13 | ≥10 | ≥5 | ≥8 |
Coefficient o linear expansion | 1.9×10-5/℃ | 1.8×10-5/℃ | 1.6×10-5/℃ | 1.8×10-5/℃ | 1.9×10-5/℃ |
Max.Temp. | -40~+300℃ | -40~+400℃ | -40~+400℃ | -40~+400℃ | -40~+300℃ |
Max.dynamic load | 100 | 60 | 50 | 70 | 120 |
Max.speed(Dry) | 15 | 10 | 20 | 10 | 15 |
N/mm²*m/s(Lubrication) | 200 | 60 | 60 | 80 | 200 |
Compression deformation | < 0.01 mm | < 0.05mm | < 0.04mm | < 0.05mm | < 0.005mm |
Product NO. | Chemical Compositions | ||||||||
VSB-50 | Cu | Zn | Al | Fe | Mn | Si | Ni | Sn | Pb |
60~66 | 22~28 | 5.0~8.0 | 2.0~4.0 | 2.5~5.0 | <0.1 | <0.5 | <0.2 | <0.2 |
Bearing forms available in standard dimensions
· Cylindrical bushes
· Flanged bushes
· Sliding plates
SHIPPING:
1.Delivery Time:Usually 15-30 days.Depends on your quantity.
2.Generally Free of standard size sample within 5 days.
START YOUR
PROJECTWITH AN APPLICATION ENGINEER
Bushings,Lubricated Bearings,Composite Bearings,Metal Bearings,Compressor Bearings,Metal-polymer,Filament Wound,Plain Bearings,Flange Bearings,Polymer Bearings,Flange Bushings,Pump Bearings,Flanged Bushes,Thrust Plates,Industrial Bearings