Active Member
|
[China]
Address: HuaShan Road 18th GaoChun Economic Development Zone NanJing City.China
Contact name:Iris Chen
WENZHOU HUALE MACHINERY CO.,LTD |
|
|
Heat Sealing And Vacuum Packing Alu Alu Blister Machine For Tablets / Capsules
DPP-140E
Model | ALU ALU | ALU-PVC | |
Machine Body | Stainless Steel 304/316 | ||
Blanking frequency(times/min) | 15-30 | 20-45 | |
Adjustable pulling length | 30-120mm | ||
Blister Plate Size | Design According To Customers’ Requirements | ||
Max Forming area and depth(mm) | 140*110*12 | 140*110*15 | |
Air compressor(self-prepared) | 0.6-0.8Mpa ≥0.4m3/min | ||
Mould cooling | (Recycle water or circulating water consumption) 40-80 L/h | ||
Power supply(Three phase) | 380V/220V 50HZ 3KW
| 380V/220V 50HZ 5.5KW
| |
Wrapper specification (mm) | Alu Alu Foil 150*(0.14-0.18)*(Φ400) | PVC 150*(0.15-0.4)*(Φ400) | |
Aluminum Foil:150*(0.02-0.15)*(Φ400) | |||
Overall Dimension(L*W*H) (including foundation) | 2400*650*1450 | ||
Dimension of Each Part | 1350*650*1250(front) | ||
1050*650*1450(back) | |||
Weight | About 800kg | ||
DPP-250E
Model | ALU ALU | ALU-PVC | |
Machine Body | Stainless Steel 304/316 | ||
Blanking frequency(times/min) | 15-30 | 20-45 | |
Adjustable pulling length | 30-120mm | ||
Max Forming area and depth(mm) | 250*120*12 | 250*110*15 | |
Air compressor(self-prepared) | 0.6-0.8Mpa ≥0.45m3/min | ||
Mould cooling | (Recycle water or circulating water consumption) 40-80 L/h | ||
Power supply(Three phase) | 380V/220V 50HZ 4.5KW | 380V/220V 50HZ 8KW | |
Wrapper specification (mm) | Alu Alu Foil 260*(0.14-0.18)*(Φ400) | PVC 260*(0.15-0.4)*(Φ400) | |
Aluminum Foil: 260*(0.02-0.15)*(Φ400) | |||
Overall Dimension(L*W*H) (including foundation) | 2900*750*1600 | ||
Dimension of Each Part | 1500*750*1600(front) | ||
1400*750*1450(back) | |||
Weight | About 1200kg | ||
Description
1.Vibration feeder and crisp remover can effectively remove the powder and crisps inside medicine.
2. Auto counting, horizontal perforation, slitting, waster-side cutting, printing batch number and auto punch etc functions can be achieved automatically in one process.
3. The diameter of heat pressing cam can be changed from 110 to 140 mm.
4. The rotation speed of the material controlling cam is equal to heat pressing cam, and the cams equilibrium is equal to medicament nest of heat pressing cam. Therefore it can have the distance from the plate edge the medicament nest and the one between the central medicament nest be equal.
5. The punch adopts electronic checking signal and PLC programs. It can change the number of granules at any time in the horizontal direction of the plate, making the user free to change the plates without replacing the moulds.
6. PLC Human Interface, Auto Alarm.
Attention
When make ALU ALU product:
Turn off No.3 (Heating box),change the feeder to shaking type feeder and change molds(Forming up and
down molds, sealing up and down molds, blanking up and down molds)
When make ALU PVC product: Turn on all of the stations.
