Active Member
|
[China]
Address: No.388 Heping Road, Xinxiang City, Henan Province,China
Contact name:Emily
Xinxiang jinrui machinery factory |
|
|
1. Brief Introduction
| Model | Screen Surface Size | Screen Cloth Aperture | Capacity | Vibration Frequency | Power | Screen Surface Inclination |
| (mm) | (mesh) | (t/h) | (r/min) | (kw) | (degree) | |
| ZS-520 | 500*2000 | 2-325 mesh | ≤ 5 | 1460/960 | 0.4*2 | 0-10° |
| ZS-525 | 500*2500 | ≤ 8 | 0.55*2 | |||
| ZS-1020 | 1000*2000 | ≤ 12 | 1.1*2 | |||
| ZS-1025 | 1000*2500 | ≤ 16 | 1.1*2 | |||
| ZS-1030 | 1000*3000 | ≤ 20 | 1.5*2 | |||
| ZS-1224 | 1200*2400 | ≤ 23 | 1.5*2 | |||
| ZS-1525 | 1500*2500 | ≤ 28 | 2.2*2 | |||
| ZS-1530 | 1500*3000 | ≤ 32 | 2.2*2 |
6.Feature
1. The screening precision is great, while the blocking rate of
screen is less than 10% in average.
2. The screen frame is usually made of wood, or steel or stainless
steel. If the mesh diameter is large than 2 mm, and the production
capacity is high, the stainless steel frame will be better.
3. Enclosed structure is adopted for the linear vibrating screen to
avoid particulate matter pollution to the air.
4. The low energy consumption and low noise(73-80 dB) make the
machine quite eco-friendly.
5. The screen is woven by stainless steel wire, so its service life
is quite long and the maintenance is simple. It can be used in
single layer for multi-layer(7 layers at most).
6. The motor could be mounted eighter at the bottom or on the side
of the vibrating body.
How to get one set of linear vibrating screen separator? Only by telling us the following information for selection:
Service:
1. Special design offered.
2.Buyer label paste offered.
3.Sample testing support.
4.View our Factory
5.One year warranty.
6. Three years extended warranty.
7. 24 hours inquiry and consulting support.
8. Training how to instal and use the machine.
1. Material’s name, bulk density, and water content
2. Capacity you required___kg/h
3. What’s the purpose for our machine? Filtering, removing
impurities or classification?
4. How many layers do you need?
5. The mesh size for each layer
6. Voltage and frequency
