Shenzhen Wensidun Technology Co., Ltd. |
|
Tetracycline Rapid Test Strips for Tissue 96 Tests/Kit Test Need 15 ~ 30 min
1. Specifications:
8 dipsticks/bottle, 12 bottles/box
2. Brief
This product is used for testing Tetracycline in tissue sample
(including chicken, fish, shrimp etc.) qualitatively. The whole
test need 15~30min, easy to operate with high sensitivity.
3. Detection limit: ppb(ug/kg)
Tetracycline | 10-15 |
Oxytetracyline | 40-50 |
Chlortetracycline | 15-20 |
Doxycycline | 60-80 |
4. Contents
1 | Tetracycline test strip | 8 strip/bottles, 12 bottles |
2 | Red-powder micro-wells | 96 wells |
3 | Manual | 1piece |
4 | Desiccant | 2pieces/bottle |
5 | 10X Sample extract solutionA | 1bottle |
6 | Sample extract solutionB | 1 bottle |
5. Principle
The Tetracycline rapid test strip is based on competitive
inhibition immuno-chromatographic principle. In the flow process,
Tetracycline in the sample combined with Tetracycline specific
colloidal gold-labeled monoclonal antibody, Inhibit the combination
between antibody and Tetracycline-BSA conjugate on Test line of NC
membrane, lead to the color change of Test line. When the sample
has no Tetracycline residue or concentration lower than detection
limit, T line is darker than C line or T line has same color with C
line ; when the concentration is equal to or higher than detection
limit, T line is obviously lighter than C line or T line has no
color . No matter whether there is Tetracycline residue in sample,
C line will appear, it means the test is valid.
6. Sample preparation
1) Sample extract solution A: Dilute 10X Sample extract solution A
with deionized water at 1:9. (1 part 10X Sample extract solution A
+ 9 parts deionized water)
2) Sample treatment
Fish and Chicken
Take 3±0.05g homogenized tissue sample, add 3ml Sample extract
solution A, shake for 3min;then add 300ul Sample extract solution
B, shake for 3min; centrifuge at 4000rpm for 10min, take up-layer
solution for test.
Shrimp
Take 3±0.05g homogenized tissue sample, add 3ml Sample extract
solution A, shake for 3min;then add240ulSample extract solution B,
shake for 3min; centrifuge at 4000rpm for 10min, take up-layer
solution for test.
7. Operation procedures
7.1 Read the instruction carefully before use. Return test strips
and sample into room temperature.
7.2 Take bottles needed from the kit package, take out required
microwells and strips, making proper marks. Please use these test
strips within 1h. Seal the cap of the bottles, avoid moisture.
7.3 Take 200ul of the test samples into the micro-wells, then
repeatedly pump and suck for many times, mix the sample with the
reagent in the micro-wells completely until no solid judge by
eyes(this is a very important step).
7.4 Incubate for 5min at room temperature (20-25℃), then insert the
test strips into the micro-wells with the "MAX" end fully dipped in
to the mixture solution.
7.5 Insert the test strips into micro-wells for 5min then read the
result, it is invalid in other time.
8. Test Result Interpretation
Color depth comparison of T line and C line | Result judgment | Result analysis |
T line > C line or T line = C line | Negative | No Tetracycline residue or Tetracyclineresidue is lower than detection limit in sample |
T line < C line or T line is invisible | Positive | Tetracyclineresidue is equal to or higher than detection limit in sample |
C line is invisible | Invalid | The test dipstick is invalid, test again |
9. Precautions
1) The test dipsticks can be used only once at room temperature, do
not use test dipsticks out of expiry date.
2) Please seal the bottle after taking out required test dipsticks.
If can not use all 8 micro-wells at once, cup the rest and put it
back to bottle and sealed.
3) Do not touch the white membrane surface in the middle of test
dipsticks, avoid sunlight and fan blowing directly.
4) Use the test dipsticks testing again for positive results.
5) Please contact the supplier for any questions.
6) The result is for reference only, for confirmation, please refer
to the relevant national standard method.
10. Specificity
Test 500ppb Sulfonamides, Chloramphenicol, Fluoroquinolone and
Melamine and other drugs. All the results are negative.
11. Storage and expiry date
Storage: Store at 2-8 ℃ in dark, sealed, dry place, no frozen.
Expiry date: 12 months; date of production is on box.
Q1: When will it be shipped?
A1: We will ship the goods for you as soon as possible within 7
working days after receiving the payment. (In case of external
factors such as the epidemic, the delivery may be delayed)
Q2: Does it support OEM/ODM?
A2: It can be supported, but the specific quantity needs to be more
than 100,000 pieces, which is convenient for customized products.
Q3: How is your factory doing in terms of quality control?
A3: We have nationally certified ISO9001 and ISO13485. Our
production process conforms to standard procedures to ensure
optimum product quality.
Q4: How to provide after-sales service?
A4: We provide professional online technical after-sales service.
We can provide you with one-on-one guidance via video, telephone,
etc.
Q5: What is the payment method?
A5: We receive payment by T/T.
Q6: How to ship?
A6: Choose the best shipping method for you by getting quotes from
our many cooperative carriers, and also ship according to your
requirements.