|
[China]
Trade Verify
Address: 4F, Building 4, GuoLe Technology Park, LiRong RD, DaLang, LongHua Dist. Shenzhen, China
Contact name:Cherry Liu
ANC International Co., Limited |
|
Verified Suppliers
|
|
|
8 Fiber 12 Fiber 36-Fiber MPO to LC Uni-boot Fiber Optic Fanout
Cable
Description:
8 Fiber 12 Fiber 36-Fiber MPO to LC Uni-boot Fiber Optic Fanout
Cable Assembly manufactured by ANC International Co., Limited
allows you an affordable way to enhance your networking setup for
accommodating ever-increasing bandwidth demands without needing an
expensive, major overhaul. This fiber optic patch cord comes in a
roller "Type-B" polarity. Rollover polarity is used primarily for
connecting to switches and transceivers in 40G/100G/128G
applications. In a 12-strand rollover polarity, the cable is wired
from Pin 1 on one connector end to Pin 12 on the opposite end. Then
2 to 11, and so forth. All our mpo fiber optic patch cords are
assembled to meet industry performance standards. Each product is
individually tested to make sure you receive the highest quality,
and the results of each test are included with the product.
The MPO fanout patch cord is comprised of one MPO female
connector on one end and 4pcs LC uniboot fiber connectors on the
other end. The MPO fanout cables utilize 8 core multimode fibers to
fully transmit 40GBASE-eSR4, 4 fibers in each direction
transmitting at 10Gbps. The fiber optic fanout cable conforms
to Method B (Cross-Connect) polarity, and MTP® connector is
available upon request. This multimode MPO to 4xLC uniboot fanout
cable is suitable for use in 100G QSFP28 SR4 to 25G SFP28 SR or 40G
QSFP SR4 to 10G SFP+ SR transceiver. This fanout patch cord is
an ideal solution for data distribution in current data center;
These MPO MTP fanout cable assembly can be configured with 8fiber
12 fiber, 24 fiber, MPO MTP connectors. They are available in both
male and female version. This MPO Fanout cable assemblies are
available in OM3, OM4 or SM fiber in lengths of 5, 10, 25 meters,
custom lengths are available on request.
Single mode 9/125µm is optimized for long range (LR) distances,
while multimode is only capable of short range (SR) data transfer.
Features:
Used for the transition between trunk backbone assemblies and fiber
rack system;
Standard loss or Elite loss MPO/MTP optional
MPO or MTP optional
100% inteferemeter pass before shipping
100% tested for low insertion loss performance and high return loss
Factory-terminated provide consistent quality, high performance and
reduce installation time
Save Time & Space with MPO and uniboot LC connectors
SM G657A1, G657A2, OM3, OM4, OM5 or customized fiber optional
Comply with IEC 61754-7, TIA/EIA 604-5, Telcordia GR-1435-CORE and
RoHS
LSZH Jacket by Default
Customized furcation length to cater for different installation
situations
Applications:
Telecommunication
Data Center
LAN, FTTX
CATV
Optical Performance:
| MPO/MTP | SM Standard | SM Low Loss | MM Standard | MM Low Loss | |
| Insertion Loss | Typical | 0.35dB | 0.20dB | 0.35dB | 0.20dB |
| Max | 0.75dB | 0.35dB | 0.65dB | 0.35dB | |
| Return Loss | APC≧50dB | ≧25dB | ≧35dB | ||
| PC≧40dB | |||||
| Durability | ≤0.3dB (change 500matings) | ≤0.3dB (change 1000matings) | |||
| Exchangeability | ≤0.3dB (Connector randomly) | ||||
| Tensile Strength | ≤0.3dB (Max 66N) | ||||
| Vibration | ≤0.3dB (10~55Hz) | ||||
| Operation Temperature | -40℃ ~ +75℃ | ||||
Generic Connector Performance:
| LC, SC, FC, ST Connector | Singlemode | Multimode | |
| UPC | APC | PC | |
| Maximum Insertion Loss | ≤ 0.3 dB | ≤ 0.3 dB | ≤ 0.3 dB |
| Typical Insertion Loss | ≤ 0.2 dB | ≤ 0.2 dB | ≤ 0.2 dB |
| Return Loss | ≧ 50 dB | ≧ 60 dB | ≧ 25 dB |
| Operating Temperature | -40℃ ~ +75℃ | ||
| Test Wavelength | 1310nm | 850nm | |
