|
[China]
Trade Verify
Address: 4-510, 33 BUILDING, NO.6 HOUTIAN ROAD HIGH-TECH DEVELOPMENT DISTRICT,LUOYANG AREA OF CHINA(HENAN)PILOT FREE TRADE ZONE
Contact name:vivihe
LUOYANG SUPER FOLIAGE IMPORT&EXPORT TRADE CO,LTD |
|
Verified Suppliers
|
|
|
20MnV6 St52 Hard Chrome Plated Shaft Round Bar Quenched Tempered
Introduction
Hard Chrome Plated Shaft with high precision and high
roughness ,with high hardness in the surface and not easy to
abrasion, can prolong the usage time
Surface is rusty and corrosion resistant
Usage:
Hard Chrome Plated Shaft is used for hydraulic and pneumatic, engineering machinery, automobile manufacture and so on
Parameters
Model | 20MnV6 St52 Hard Chrome Plated Shaft Round Bar Quenched Tempered | ||
Diameter | Metric
Diameter:3mm,4mm,5mm,6mm,8mm,10mm,12mm,16mm,20mm,25mm.....300mm Inch
Diameter:6.35mm.9.525mm.12.7mm,15.875mm,19.05mm,25.4mm,31.75mm,38.1mm | ||
Length | Full Length 6000mm, it can be cut off according to customer
requirement. | ||
Quality | ISO9001:2008 standard | ||
Material | CK45 (SAE1045, S45C), 42CrMo (SAE4140), 20MnV6,St52, Stainless
Steel | ||
Surface finish | Hard Chrome / None Chrome | ||
Plating Thickness | 10um ~ 20um in radius. | ||
Heat treated | Not Hardened / Induction Hardened | ||
Hardness | HRC:58-62 | ||
Hardness Depth | 0.8-3.0mm | ||
Precision | g6, h6, h7 or according to your requirement. | ||
Roughness | Less than 1.5μm | ||
Straightness | Less than 1.5μm of 100mm (Rmax) | ||
Roundness | Less than 3.0μm (Rmax) | ||
Performance | Long life and low noise | ||
Custom-made | End Stepped, End Tapped, End Tread, Wrench Flats, Cross Drilled
Holes, Key Groove, Set Screw Grooved, and so on. | ||
technical standard:
Outer diameter accuracy: f7, f8, h7
Surface finish: ≦Ra0.4S
Roundness: ≦0.01mm
Straightness: ≦0.15/1000mm
Hard chrome plating thickness: 0.015~0.05mm (can be customized
according to customer requirements)
Surface hardness: HB220-260
Standard outer diameter: ￠3~￠120
Standard length: 1000-6000mm
Material: S45C (45#), 40Cr, GCr15, 2Cr13, 42CrMo, SUS304, SUS303,
SUS316, etc.
