|
[China]
Trade Verify
Address: 4-510, 33 BUILDING, NO.6 HOUTIAN ROAD HIGH-TECH DEVELOPMENT DISTRICT,LUOYANG AREA OF CHINA(HENAN)PILOT FREE TRADE ZONE
Contact name:vivihe
LUOYANG SUPER FOLIAGE IMPORT&EXPORT TRADE CO,LTD |
|
Verified Suppliers
|
|
|
2mm 3mm 6mm Chrome Plated Rod Hydraulic Chrome Bar Cold Rolled
Introduction of Hydraulic Chrome Bar
Chrome Plated Rod is the main part of the hydraulic cylinder.The
inner
hole of the hydraulic cylinder tube usually precision processed by
boring,reaming,rolling
or honing.By these process can ensure the piston,sealing elements
and the support
elements move smoothly,then ensure the sealing effect and reduce
the abrasion.
Usage of Hydraulic Chrome Bar :
Structure pipe; High and low pressure boiler tube; Liquid delivery; Seamless steel pipe for petroleum cracking ,Oil pipe,Gas pipe
Parameters of Hydraulic Chrome Bar
Model | 2mm 3mm 6mm Chrome Plated Rod Hydraulic Chrome Bar Cold Rolled | ||
Diameter | Metric
Diameter:3mm,4mm,5mm,6mm,8mm,10mm,12mm,16mm,20mm,25mm.....300mm Inch
Diameter:6.35mm.9.525mm.12.7mm,15.875mm,19.05mm,25.4mm,31.75mm,38.1mm | ||
Length | Full Length 6000mm, it can be cut off according to customer
requirement. | ||
Quality | ISO9001:2008 standard | ||
Material | CK45 (SAE1045, S45C), 42CrMo (SAE4140), 20MnV6,St52, Stainless
Steel | ||
Surface finish | Hard Chrome / None Chrome | ||
Plating Thickness | 10um ~ 20um in radius. | ||
Heat treated | Not Hardened / Induction Hardened | ||
Hardness | HRC:58-62 | ||
Hardness Depth | 0.8-3.0mm | ||
Precision | g6, h6, h7 or according to your requirement. | ||
Roughness | Less than 1.5μm | ||
Straightness | Less than 1.5μm of 100mm (Rmax) | ||
Roundness | Less than 3.0μm (Rmax) | ||
Performance | Long life and low noise | ||
Custom-made | End Stepped, End Tapped, End Tread, Wrench Flats, Cross Drilled
Holes, Key Groove, Set Screw Grooved, and so on. | ||
technical standard:
Outer diameter accuracy: f7, f8, h7
Surface finish: ≦Ra0.4S
Roundness: ≦0.01mm
Straightness: ≦0.15/1000mm
Hard chrome plating thickness: 0.015~0.05mm (can be customized
according to customer requirements)
Surface hardness: HB220-260
Standard outer diameter: ￠3~￠120
Standard length: 1000-6000mm
Material: S45C (45#), 40Cr, GCr15, 2Cr13, 42CrMo, SUS304, SUS303,
SUS316, etc.
