Active Member
|
[China]
Address: Office Address: Building 4, No. 51 Jingbei 3rd Road, Jingkai Zone, Zhengzhou City. Henan Province,China.
Contact name:chen
Henan Lantian Medical Supplies Co.,Ltd. |
|
|
Before testing, restore all reagents to room temperature. The test
should be carried out at room temperature.
I. Sample extraction (see Figure 1)
1. Add 400μL (about 10 drops) of sample buffer vertically to the
sample extraction tube, then insert the sample into the solution in
the sample extraction tube and rotate it against the inner wall
about 10 times to dissolve the sample in the solution as much as
possible.
2. Squeeze the sample q-tip along the inner wall of the extraction
tube to keep as much liquid in the tube as possible, then remove
and discard the sample.
3. Cover the dropper.
Ii. Test Procedure (See Figure 2)
1. Take the test card out of the sealing bag.
2. Add 2 drops (about 80μL) of the treated sample extract to the
sample well of the test card, then start the timer.
3. Read the results after placing the test card at room temperature
for 15 minutes. The result was invalid after 20 minutes.
Schematic diagram of test card result judgment:
① Invalid results: There is no response line on the quality control
line (C line), the test is invalid, and the test should be
repeated.
② Negative results: red ribbon, quality control line (line C) is
color.
③ Positive results: two red bands, test line (T line) and quality
control line (C line) are color.
