Active Member
|
[China]
Address: Office Address: Building 4, No. 51 Jingbei 3rd Road, Jingkai Zone, Zhengzhou City. Henan Province,China.
Contact name:chen
Henan Lantian Medical Supplies Co.,Ltd. |
|
|
Restore all reagents to room temperature before testing. The test
should be conducted at room temperature.
I. Extraction of specimens (see Figure 1)
1. Add 400μL (about 10 drops) sample buffer vertically to the
sample extraction tube, then insert the sampled sample into the
solution, rotate close to the inner wall about 10 times, so that
the sample can be dissolved in the solution as much as possible.
2. Squash the sample tip along the inner wall of the extraction
tube to keep the liquid in the tube as much as possible, remove and
discard the sample.
3. Cover the emitter.
II. Test Procedure (See Figure 2)
1. Remove the test card from the sealed bag.
2. Add 2 drops (about 80μl) of the treated sample extract to the
adding well of the test card, and then start the timer.
3. Read the results when the test card is placed at room
temperature for 15 minutes.The result was invalid after 20 minutes.
① Invalid results: no reaction line appeared in the quality control
line (line C), and the test was invalid. The experiment should be
redone.
② Negative results: a red ribbon, quality control line (line C)
color.
③ Positive result: two red bands, color display on both test line
(T line) and quality control line (C line).
