|
[China]
Trade Verify
Address: RM29030 #A2 Bldg ,Forte Land Square , Yuhua Dist ,Changsha, Hunan Prov ,CN 410000
Contact name:Sara
Hunan Sanyi Technolody limited |
|
Verified Suppliers
|
|
|
Technical Parameter
| Module | Parameters |
| User interface | 1*10/100/1000MRJ45 3*10/100M RJ45 1*POTS 1*USB 2.4G WiFi |
| PON | EPON&GPON mode adaptive Interface Type:SC-UPC/SC-APC Network coverageradius:20KM |
GPON:upstream 1.25Gbps/downstream 2.5Gbps Transmission optical power:0.5dBm~5dBm Opticalreceive sensitivity:-7dBm~-28dBm | |
EPON:upstream 1.25Gbps/downstream 1.25Gbps Transmission optical power: dBm~0.4dBm Optical receive sensitivity:-7dBm~-27dBm | |
| Ethernet | 1*10/100/1000M+3*10/100M auto-negotiation Full/half duplex mode |
| Size | 140mm(L)x90mm(W)X30mm(H) |
| Environment | Operating temperature:0°C~60°C Operatinghumidity:10%~85% non-condensing Storage temperature:-40°C~80°C Storage humidity:5%~95% non-condensing |
| Power supply | 12V/1A DC power interface size:21mm/5.5mm |
| Power Consumption | <8.5W |
| POTS Port | 1*RJ11with3REN Max 1km distance Balanced Ring,55V RMS |
| Man | WEB/TELNET/TR069/OMCI/OAM |
Product Interfaces
| 1 | POWER | Power status | On: The ONU is power on Off: The ONU is Power off |
| 2 | PON | ONU Register | On: Success to register to OLT Blinking: In process of registering to OLT Off: Fail to register to OLT |
| 3 | LOS | Optical Signals | On: Optical power lower than receiver sensitivity Off: Optical in normal |
| 4 | LAN | LAN Port status | On:Ethernet connection is normal Blinking: Data is being transmitted Off: Ethernet connection is not set up |
| 5 | 2.4G | WIFI | On: Wi - Fifunction Opens Blinking: Data is being transmitted Off: Wi - Fifunctions closes |
| 6 | POTS | POTS status | On: POTS port Registered Off: POTS port not Registered |
Key Features
- Support device - based rate limitation and bandwidth control
- In compliant with IEEE802.3ah Standard &ITU-T G984 standards
- Wi - Fi series meet 802.11 n/b/g technical standards
- Up to 20KM transmission Distance
- Support data encryption, group broadcasting, port Vlan
separation, etc.
- Support Dynamic Bandwidth Allocation (DBA)
- Support ONU auto - discovery/Link detection/remote upgrade of
software;
- Support port VLAN configuration
- Support power - off alarm function ,easy for link problem
detectionSupport broadcasting stormresistance function
- Support port binding
- Support port forwarding
- Support ACL to configure data packet filter flexibly
- Specialized design for system breakdown prevention to maintain
stable system
- Support software online upgrading
- Support TR069 for ACS(Auto Config Server)
- Support PPPoE/DHCP Server/1PTV/VolP/NAT
Voice Service Functions
- With the heartbeat function, support the main producing soft exchange platform;
- Support high / low speed mode transparent transmission, T38 two
fax;
- Support high-speed Modem (56Kbps) dial access; support RFC2833
and redundantRFC2833, ringing, MD5 certification, call forwarding,
call waiting, the hotline, alarmclock, abbreviated dialing and
other value-added services;
- Support SIP (compatible with IMS), H.248, MGCP three VolP
protocol, and the softswitch platform the mainstream can be good
intercommunication;
- Support 1 POTS interface and the three party call, three party support local mixing;
- Support POTS port GR909 line test function;
- Support dynamic PPPOE, DHCP and static IP;
- Support ITU-T G.711,G.723.1, GTo canceller for the longest 128ms;
- 7* 24 hour call loss is less than or equal to 0.01%;
WIFI Features(2.4G)
- Wi-Fi Specification lEEE 802.11n compliant,2.4 GHz
- Full IEEE 802.11b/g legacy compatibility with enhanced performance
- Two-stream spatial multiplexing up to 300 Mbps PHY data rates
- Support multi-SSID (Maximum 4 SSID)
- Support automatic channel selection
- Support hide SSID
- Support wireless security of 64/128 bit WEP802.1x,WPA and WPA2
Ordering Information
| Product Model | Descriptions |
| XPON 131W | 1*10/100/1000M+3*10/100MEthernetinterface(RJ45) 1 EPON/GPON adaptive interface |
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A: Sample needs 1-3 working days, mass production time needs 3-5
weeks based on order quantity.
Q3. Do your products meet our standards?
A: Yes, almost all our products have CE,ROHS,FCC,etc.
Q4. How to proceed an order?
A: Firstly let us know your requirements or application. Secondly
We quote according to your requirements or our suggestions.Thirdly
customer confirms the samples and places deposit for formal order.
Then we arrange the production.
Q5. What is your payment term?
A: We have Ali- pay, T/T, Visa,Western Union payment terms options,
you can choose the one which is convenient or effective for you!
Q6. Can you customized logo and packaging?
A: Yes, OEM/ODM are acceptable. Our design team will help you
design as your requirement.
