Results for4000lux miners cap lampfrom 6634 Products.
|
|
E14 lamp cap gauge | Gauge for finished lamps fitted with E14 caps for testing protection against accidental contact E14-7006-55-2 Purpose: to check protection against accidental ...
|
|
|
|
|
E26d Lamp Cap Gauge | Gauge With Reference Diameter Of 13.2mm For Caps E26d | 7006-29C-2 PURPOSE: To check dimensions Cmax. and C1max. of caps E26d. TESTING: When the unmounted cap ...
|
|
|
|
|
GX53 Lamp cap gauge | "NOT GO" Gauge For Caps GX53 | 7006-142D-1 PURPOSE: To check the minimum cap diameter (dimension L1) of caps GX53-.. TESTING: It shall not be possible to ...
|
|
|
|
|
GX53 Lamp cap gauge | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1 PURPOSE: PURPOSE: To check caps GX53-1 in the following respects: - correct keyway ...
|
|
|
|
|
GX53 Lamp cap gauge | "NOT GO" Gauge For Checking Keyways in Caps GX53 | 7006-142F-1 PURPOSE: To check the maximum keyway width (dimension X) of caps GX53-.. TESTING: It shall not ...
|
|
|
|
|
E26 Lamp cap gauge | go gauges for caps E26-7006-27D-3 “GO” GAUGE FOR CAPS CALIBRE «ENTRE» POUR CULOTS E26, E26/50x39, E26/51x39 & E26d Dimensions in millimetres - Dimensions en ...
|
|
|
|
|
GX53 Lamp cap gauge | "GO" and "NOT GO" Gauge For Caps GX53 | 7006-142-1 PURPOSE: To check caps GX53-.. in the following respects: - the diameter of the individual pins (dimension ...
|
|
|
|
|
G5 lamp cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G5-7006-46-3 Purpose: to check dimensions E min., E max., F min., G max. and the ...
|
|
|
|
|
G10q , GX10q, GY10q,GZ10q Lamp cap gauge , "GO" GAUGE FOR CAPS C G10q, GX10q, GY10q , GZ10q GO" GAUGE FOR CAPS CALIBRE «ENTRE» POUR CULOTS G10q, GX10q, GY10q & GZ10q Mass: 0.45kg ...
|
|
|
|
|
E27 Lampholder gauges | Gauge For Testing Contact-making and Protection Against Accidental Contact During Insertion Of Lamps in Lampholdes E27-7006-22A-5 Purpose: to check E27 lamp ...
|
|
|
|
|
Items Model Description Standard E27 Lamp cap gauge 7006-27B-1 go gauge for E27 caps on finished lamps IEC60061-3
|
|
|
|
|
Items Model Description Standard E12 lamp cap gauge 7006-32-1 gauge for finished lamps fitted with E12 caps for testing contact-making IEC60061-3
|
|
|
|
|
Items Model Description Standard E12 lamp cap gauge 7006-28C-1 not go gauge for caps on finished lamps E12 IEC60061-3
|
|
|
|
|
Items Model Description Standard E12 lamp cap gauge 7006-27H-1 go gauge for caps on finished lamps E12 IEC60061-3
|
|
|
|
|
Items Model Description Standard E14 lamp cap gauge 7006-27F-1 go gauge for E14 caps on finished lamps IEC60061-3
|
|
|
|
|
Items Model Description Standard E14 lamp cap gauge IEC62560 Figure 3 Figure 3 – Holder for torque test on lamps with screw caps IEC62560
|
|
|
|
|
Items Model Description Standard E14 lamp cap gauge 7006-28B-1 not go gauge for E14 caps on finished lamps IEC60061-3
|
|
|
|
|
Items Model Description Standard E17 Lamp cap gaueg 7006-26D-1 gauge for testing contact-making of lamps fitted with caps E17 IEC60061-3
|
|
|
|
|
Items Model Description Standard E40 Lamp cap gauge 7006-28D-1 not go gauge for caps on finished lamps E40 IEC60061-3
|
|
|
|
|
Items Model Description Standard E27 Lamp cap gauge 7006-51A-2 gauge for caps on finished lamps for testing protection against accidental contact during insertion E27 IEC60061-3
|
|
|
