Results for23t used excavator equipmentfrom 218447 Products.
|
Welcome to use our instrument. Please check the accessories by referring to the list of attachments after the instruction after opening the instrument package. Please read this ...
|
|
|
|
Mask resistance tester 1.Test standard: yy0469-2011 medical surgical mask Differential pressure tester is used for pressure difference detection of surgical masks. The equipment is ...
|
|
|
|
IEC 62368-1-Annex E.2 Testing box | Audio amplifier normal operating temperature measurements box Test conditions for equipment containing audio amplifiers E.2 Audio amplifier ...
|
|
|
|
IEC60335-2-2 cl.21.104 Vacuum Cleaner Current-Carrying Hose Resistance Torsion Testing Machine Functional Overview: This equipment is designed according to the requirements of ...
|
|
|
|
Limited short-circuit test , IEC 62368-1-Annex R R.3 Test method The source shall be applied to the EUT via the mains cord supplied or specified by the equipment manufacturer. ...
|
|
|
|
ISO 5356-1; Anesthetic and Respiratory Equipment – Conical Connectors – Part 1: Cones and Sockets ISO 5356-1 Introduction In clinical practice, several breathing attachments used ...
|
|
|
|
IEC 60601-1Grips and other handling devices-7 cm strap tester Carrying handles or grips furnished on PORTABLE ME EQUIPMENT shall withstand loading as described in the following ...
|
|
|
|
ISO5356-1 Gauges For Testing HME patient port connector ISO 5356-1 Anesthetic and Respiratory Equipment – Conical Connectors – Part 1: Cones and Sockets ISO 5356-1 Introduction In ...
|
|
|
|
Chapter one: introduction of the instrument 1.1 Characters and main use This tester is used to perform the fatigue test on the AC and DC power cord and power cords lead. This is ...
|
|
|
|
UL1439 Sharp Edge Tester with 21 tape cap kits for sharp edge testing Product Description Sharp Edge Tester meets the standard requirement of UL1439, and it is used for testing ...
|
|
|
|
IEC60065:2014 clause 12.5 Figure 9 Test Plug For Mechanical Tests On Antenna Coaxial Sockets Standard: IEC60065:2014 clause 12.5 Figure 9. Application: It is used to test the ...
|
|
|
|
4 Station Flexing Test Apparatus Instrument Introduction 1.1 Main uses This instrument is mainly used to test the flexural fatigue strength of AC power cords and plug leads. It is ...
|
|
|
|
Hot Flaming Oil Tester , Hot Flaming Oil Flammability Test Chamber IEC 60950 Annex A.3 Product overview: The hot flaming oil test device conforms to IEC60950-1:2005 and IEC60950-1...
|
|
|
|
UL Rain Tester Description: This equipment is a device intended for use in wet locations.Water shall not enter the ballast or device lampholder compartments. Specification: Spray ...
|
|
|
|
IP1/2/3/4-1000 Rain Test Chamber This equipment can be use to inspect the ability of electrical product shell protect product and accessories to rain. This equipment can simulate ...
|
|
|
|
Cable Testing Equipment Thermostatic Control Oil Bath For Wire Industry 1. Quick Details: Alternative name High temperature oil bath Function Test capability of cables under high ...
|
|
|
|
Cable Testing Equipment For Cable Bending / Swinging / Loading Test Quick Details: Alternative name Cable bending tester Function Test bending resistance of cable and wires Feature ...
|
|
|
|
11 .2.2 M E EQUIPMENT and ME SYSTEMS used in conjunction with OXYGEN RICH ENVIRONMENT 11 .2.2.1 RISK of fire in an OXYGEN RICH ENVIRONMENT In ME EQUIPMENT and ME SYSTEMS , the RISK ...
|
|
|
|
IEC 60601-1-Figure 33 Body upper-carriage module 9.8.3.3 * Dynamic forces due to loading from persons Where dynamic forces (due to sitting down, standing up, PATIENT handling ...
|
|
|
|
UL Rain Test Apparatus Test Equipment: UL Rain Spray Test Apparatus for Outdoor electrical enclosure waterproof test Applicable Standards: UL1598 / CSA250, UL50E / CSA 94.2, UL ...
|
|
|
You may also be interested in :