Description of Handheld Rod Splitter
The entire working process of the splitting rod relies on the
ultra-high pressure oil station. In the design process of the gas
station, we independently developed an intelligent device. When the
pressure reaches 100mp, the motor will stop rotating, the oil pump
will stop working, and the entire gas station will be in a
pressure-holding state.
Technical Parameter of Handheld Rod Splitter
Model | Length(mm) | Piston | Plunger | Hole | Extension | Weight(kg) |
Quantity | Diameter(mm) | Diameter(mm) | Length(mm) |
ZT90 | 650 | 9 | 35 | 87 | 15 | 27 |
ZT100 | 710 | 8 | 45 | 112 | 25 | 47 |
ZT110 | 820 | 11 | 40 | 100 | 22 | 44 |
ZT120 | 770 | 8 | 45 | 122 | 15 | 60 |
ZT130 | 1006 | 10 | 45 | 130 | 23 | 97 |
ZT150 | 960 | 8 | 50 | 153 | 33 | 118 |
ZT170 | 1004 | 8 | 60 | 174 | 34 | 166 |
ZT200 | 1285 | 8 | 70 | 200 | 32 | 291 |
Advantages of Handheld Rod Splitter
1. When the hydraulic splitting rod is working, a rock drill and a
DTH drill can be used to drill a hole with a large diameter, the
hole depth is at least 1-2 meters, and then the hydraulic splitting
rod is placed in the drilled hole, and the hydraulic pump is
started. The hydraulic splitting rod extends out of the splitting
hole at the same time.
2. The splitting rod is suitable for the mining of rocks of various
textures, will not produce vibration, noise, dust, etc. during the
work, and can realize silent mining without affecting the
surrounding. It only takes a few seconds to rupture once, and it is
a fast and fast mountain-making machine, such as the mining of
marble, granite, bluestone, silica, calcite, and other stones.
3. When working, no vibration, impact, noise, or dust flying chips
will be generated. Fully mechanized, it is based on the excavator
as a power machine for auxiliary value-added, and works in
conjunction with the excavator, which can be completed,
environmentally friendly, and cost-effective.
Application of Handheld Rod Splitter
1. Mining of large stones: the secondary splitting and rupture of a
block of several thousand cubic meters can be realized;
2. The division of large blocks: the division of blocks below 1
cubic meter can be realized)
3. Remove large waste rocks, dead corners, and obstacles, level the
site, etc.
4. Engineering field: Municipal foundation, widely used in urban
construction.
5. Earthwork excavation works: roads and bridges, houses,
foundations, reinforced concrete demolition, and other works.
6. Smelting and dismantling work: crushing and dismantling of
various smelting furnaces, kilns, refractory bricks, and carbon
blocks.
Working Process of Handheld Rod Splitter
The whole working process of the hydraulic splitting rod is powered
by the ultra-high pressure oil station. 120Mpa belongs to the
ultra-high pressure sequence, and the tightness between the various
components must be of a high standard. The core components of the
ultra-high-pressure gas stations we produce are imported devices.
Truly zero failures. During the design of the gas station, we
independently developed an intelligent device. When the pressure
reaches 120Mpa, the motor will stop rotating, the oil pump will
stop working, and the entire gas station will be in a
pressure-maintaining state.
Working Notices of Handheld Rod Splitter
In operation, the hole must be straight when punching, and the rod
must be placed in the hole to ensure that the rod cannot be
exposed. If not, this would result in uneven force and an
unachievable blasting effect. Keep the horizontal plane, be a
straight line, and at the same time face the air side.