Shaanxi Zhongtuo Mine Equipment Co.,Ltd |
Verified Suppliers
|
|
Introduction
Digging, drilling and splitting machine is the use of the excavator's own hydraulic system, in no damage
Under the condition of the original working performance of the
excavator, the hydraulic oil source of the excavator is used.
Achieve full hydraulic
Rock drilling, drilling work. The digging, drilling and splitting
machine is economical and practical, easy to install, flexible,
convenient and fast for drilling and drilling.
It makes the excavator realize the function of multi-purpose,
greatly increases the scope of use of the excavator, and also
improves the use efficiency of the excavator.
The oil source of the crushing hammer is used in the hydraulic system of the excavator, the oil source of rotation and propulsion is provided through the valve group, and the compressed air is introduced from the air compressor to the impactor to realize the impact function. Thus the complete drilling function of rock drilling, drilling, slag discharging and dust blowing can be realized. This also allows the excavator to increase the drilling function, and the integrity is good so that the working performance of the excavator is increased and improved.
Advantages:
Digging and drilling splitting machine is the use of the
excavator's own hydraulic system, digging and drilling is mainly
used in the operation of drilling holes between Φ50 ~ Φ400.
The main advantages of digging-to-submersible drilling set are as
follows:
1. High energy utilization rate;
2. Adjustable impact work, torque, impact frequency, speed and
thrust parameters, give full play to the efficiency of the machine;
3. Install the hydraulic drill on the excavator to expand the
function of the excavator.