Shaanxi Zhongtuo Mine Equipment Co.,Ltd |
Verified Suppliers
|
|
Product introduction
The carbon dioxide expansion power system uses the principle that
liquid carbon dioxide absorbs heat, vaporizes, expands, and the
pressure rises rapidly. After reaching the target pressure, it
instantly releases high-pressure gas to break and loosen rocks. The
expansion tube is small in size, easy to transport, safe and
reliable in use, and has controllable power. It can be widely used
in coal mines, non-coal mines, underwater, urban municipal
construction and other fields, creating a new situation in my
country's green energy mining operations!
Working principle
Fill the wave storage tube of the carbon dioxide rupture ring with
liquid carbon dioxide, and start the heating device to generate a
large amount of heat, causing the liquid carbon dioxide in the
storage tube to instantly vaporize. The volume expands about 600
times, and the pressure rises sharply. When the pressure in the
camp reaches constant pressure shear When the sheet reaches its
ultimate strength, the high-pressure gas breaks through the
constant-pressure shear sheet and is released from the energy
discharge head. The powerful thrust generated instantly is used to
break through the material along the natural fissures of the coal
and rock mass, thereby achieving the purpose of ultra-high-pressure
rock breaking and mining.
The constant pressure shearing disc is a component that controls
the energy release pressure. Different release pressures can be
controlled by replacing shearing discs with different
specifications. The current maximum release pressure can reach
800MPa.
Comparison of physical expansion of carbon dioxide and explosion
parameters of explosives
Parameters:
Standard comparison | Co2 explosion | dynamite explosion |
Explosion method | physical volume change work | Violent physical and chemical work |
Vibration intensity | small | Huge (equivalent to a magnitude 3 earthquake) |
Vibration frequency | small | 10-30HZ |
Impact force (Mpa/cm2) | 800Mpa | 1000-5000Mpa |
Proportion equivalent (ppm) | 0 | 24ppm |
Safety distance(m) | 10-20m | 100m |
Self-explosion required | Detonate without hanging | prone to explosion |
Technical advantages
(1) Advanced design concept, using the principle of endothermic
expansion, vaporization and pressure increase between liquefied
gases for design and manufacture. The action process of the cracker
is a physical endothermic process, which is different from the
chemical explosion of explosives and does not produce harmful gases
such as carbon monoxide. , will not produce an open flame,
eliminating the possibility of igniting coal and gas; at the same
time, it can be used in complex environments;
(2) The storage pipe is made of imported special steel and can
withstand a pressure of more than 800MPa, which is much higher than
the relief pressure in normal use, ensuring that there will be no
safety hazards due to damage to the pipe body during use;
(3) The heating device will not be activated under normal
temperature and pressure, and is safe for storage and
transportation. It can only be activated in the internal
environment of the cracker. (4) The cracking power is huge, and the
rate of cracking coal and rock into blocks is high, which avoids
dust occurs, and the precise positioning of the pre-crack position
can be achieved
(5) It is not restricted by civil explosive products and can be
constructed at any time; it avoids the problems of approval,
storage and transportation, blind guns, dumb guns, etc. that exist
with explosives; (6) The economic cost is lower than that of
explosives, and the liquid storage pipe can be reused and has a
service life of up to For 10 years, the cost has been effectively
reduced; (7) The power is controllable and can be used in
environments where traditional explosives cannot be used; it can be
used at close range in buildings and environments with a large flow
of people.
use:
(8) It will not generate seismic shock waves, the vibration speed
is small, and it will not cause structural damage to the
foundation;
(9) The connection is convenient, fast and stable. The entire
system is independently developed and produced by our company. It
can be upgraded and replaced with pre-sales and after-sales
services.
Assure
Subway tunnel rock breaking effect and cleaning site
FAQ:
Q1: Whether the rig is used for rock holes or soil holes?
A1: Equipped with different drill bits according to the application
object. Rock drilling rigs are equipped with round steel drill
impact hammers and rock drill bits. The soil drilling rigs require
a twist drill pipe and a three-blade drill bit.
Q2: How much tonnage can a bridge jack lift??
A2: The range is from 50 to 1000 tons, depending on the application
needs we have the right choice for you.
Q3: How many meters is the connection between the jack and the oil
pump?
A3: The factory standard is two meters. If you need longer, we will
make it for you.
Q4: What is the difference between the hydraulic oil pump?
A4: For the tension jack, it is 50 MPa 3 kW oil pump and 60 MPa 4
kW oil pump.
Q5: What kind of packages does a set of anchors have?
A5: Anchor ring, clip, anchor pad, spiral rib.
Q6: Which payment term can you accept?
A6: 100% T/T( Decide according to actual situation)
Q7: How long is the machine warranty?
A7: One year for the machine and provide technical support
according to your needs.
Q8: How long will it take to arrange production?
A8: we can deliver the normal goods within 7-15 days. Other
nonstandard electrical items we will deliver within 25-30 days.
Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, etc.
Q10: Do you provide samples? Is it free or extra?
A10: Yes, we could offer you the sample machine. But it's not free.
You need to pay for the sample and the cost of the freight.
Q11: What are your terms of payment?
A11: We accept T/T, Western Union, Money Gram, Paypal, L/C, etc.
Why you choose us:
1. We are a real factory offering products and providing free
technical advice.
2. Company in business for many years and served Over 50 countries'
customers.
3. All machines with CE, ISO, and SGS certificates. Machine and
spindle warranty 1 year.
4. We have phone support in English, if you have any questions, you
can call us, and we can give you the best solution within 24 hours.
5. Fast delivery, save your time.