Active Member
|
[China]
Address: Room E202, No. 4528 Jiasong Road (Middle), Qingpu district 201705, Shanghai, China
Contact name:Yuan
Shanghai Runpaiq Technology Co., Ltd. |
|
|
Boiler Zone Valve Control,2 Port Zone Valve Wiring For Hot Water Flow Control
Product Description
Our control zone valves and accessories are type of motorized ball vave for controlling the flow in heating and cooling system zones. A heating zone valve is hooked directly to a thermostat. On a call for heat or cool, the thermostat contacts close completing the circuit to the zone valve and energizing a small motor in the zone control valve. This synchronous motor opens or closes the mini motorized ball valve. As the ball valve opens an end switch in the zone valve closes. An actuator motor operated valve designed for zoning hydronic heating / cooling systems utilizing baseboard, convector and fan-coil terminal units.
Features
1. Extreme ong service life span ;
2. Manual Override, the valve can be operated when power failure;
3. Mini dimension and position indicator
4. Good sealing performance, IP65 enclosure
Application
Advantages
| No. | Ours | Normal products |
| Valve shaft seal | Quadruple seals | Dual seals |
| Nut seal | Auto super anaerobic glue coating, Consistent torque tightening | Manual anaerobic glue, unevenly, non consistent torque tightening |
| Seal between valve body and housing | Seal groove | none |
| Torque | Smoothly and light | Heavy, non consistently |
| Drainage | Yes | none |
Technical data
| Material | brass, stainless steel, SS304, 316 |
| Operation pressure | PN16 |
| Type | mini motorised ball valve |
| Operate Pressure (Mpa) | PN10 |
| Torque (NM) | 2 |
| Dia range | DN15-40 |
| Open/close (S) | <13s depends on actuator motor |
| Work volt. (V) | DC3-6V, DC12V, AC220V |
| Media temp (℃) | 0-90 / 200 |
| Control | automatic motor actuator |
Factory show
