|
[China]
Trade Verify
Address: BLDG 16, #29 Rongyue Dongfang, Guandou Street, Jiujiang District, Wuhu City, Anhui Province
Contact name:Lei
Wuhu ZONCN Automation Equipment Co., LTD. |
|
Verified Suppliers
|
|
|
The NZ200 series inverter is a high-performance and user-friendly device. It is well-known for its simple structure, easy installation, and cost-effectiveness. The NZ200 series inverter offers both open-loop vector control and VF control, providing excellent overload capacity and ensuring smooth motor operation even under heavy loads with its strong torque output. It is equipped with features like instant stop and quick current regulation, reducing the probability of inverter malfunctions. Additionally, it includes various protection functions such as overheat protection and overvoltage protection, ensuring system safety and reliability. Overall, the NZ200 series inverter is a reliable and efficient solution that meets the requirements of a wide range of applications.
| Item | ZONCN NZ200 Series | |
| Control Mode | Sensorless flux vector control(SFVC) Voltage/Frequency (V/F) Control | |
| Maximum frequency | Vector control:0-320Hz V/F control:0-3200Hz | |
| Carrier frequency | 1kHz~16kHz The carrier frequency is automatically adjusted based on the load features. | |
| Input frequency resolution | Digital setting:0.01Hz Analog setting: Maximum frequency 0.025% | |
| Start torque | G: Type:0.5Hz/150%(SVC) P: Type:0.5Hz/100% | |
| Speed range | 1:100(SVC) | |
| Speed stability accuracy | ±0.5%(SVC) | |
| Overload capacity | G Type:60s for 150% of the rated current, 3s for 180% of the rated current. P Type:60s for 120% of the rated current, 3s for 150% of the rated current. | |
| Torque boost | Auto-boost ; Customized boost:0.1%~30.0% | |
| VF curve | Straight-line VF curve; Multi-point VF curve; N-power VF curve(1.2-power,1.4-power,1.6-power,1.8-power, 2-power) | |
| VF separation | 2 types: complete separation；half separation | |
| Ramp Mode | Straight-line ramp；S-curve ramp；Four groups of acceleration/deceleration time:0~6500.0s | |
| Simple PLC, Multiple preset speeds | It implements up to 16 speeds via the simple PLC function or combination of terminal states | |
| Auto voltage regulation(AVR) | It can keep constant output voltage automatically when the mains voltage changes | |
| Rapid current limit | It helps to avoid frequent over current faults of the AC drive. | |
| Torque limit and control | It can limit the torque automatically and prevent frequent over-current tripping during the running process. | |
| Onboard PID | It realizes process-controlled closed loop control system easily | |
| Rapid current limit | It helps to avoid frequent over current faults of the AC drive. | |
| JOG control | JOG frequency range: 0.00–50.00 Hz JOG acceleration/deceleration time: 0.0–6500.0s | |
| DC braking | DC braking frequency:0.00Hz to maximum frequency Braking time:0.0-100.0s Braking action current value:0.0%-100.0% | |
| Instantaneous blackout doesn’t stop | The load feedback energy compensates the voltage reduction so that the AC drive can continue to run for a short time. | |
| Timing control | Timing range:0.0Min~6500.0Min | |
| Communication | RS485 | |
| Run instruction channel | Keyboard given, control terminal given, serial communication port given. It can be switched in a variety of ways. | |
| Frequency source | 10 kinds: digital given, analog voltage given, analog current given, pulse given, serial port given. It can be switched in a variety of ways. | |
| Auxiliary frequency source | 10 auxiliary frequency sources. It can flexibly realize auxiliary frequency fine-tuning and frequency synthesis. | |
| Input terminals | 6 digital input terminals, one of which supports up to 100 kHz high-speed pulse input (S3 optional). 2 analog input terminal, one of which only supports 0-10v voltage input(FIV) and the other supports 0-10 voltage input or 4-20 mA current input(FIC). | |
| Output terminals | 1 digital output terminal(MO1) 1 relay output terminal(RA,RB,RC) 1 analog output terminal :that supports 0-20 mA current output or 0-10v voltage output(FOV) | |
| Remark | X terminal is NPN type by default. If PNP type is required, contact customer service for customization. | |
| LED display | Not removable. More than 45kw is acceptable. | |
| Keystroke locking and function selection | Realize partial or full lock of keys, and define the scope of action of some keys to prevent false touch | |
| Multiple protection modes | Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under voltage protection, overheat protection and overload protection. | |
| Model | Rated output power (kW) | Rated input current (A) | Rated output current (A) | Motor Power (kW) |
| Input voltage(v):1PH AC 220V±15% | ||||
| NZ200-0R4G-2 | 0.4 | 5.4 | 2.5 | 0.4 |
| NZ200-0R75G-2 | 0.75 | 7.2 | 5 | 0.75 |
| NZ200-1R5G-2 | 1.5 | 10 | 7 | 1.5 |
| NZ200-2R2G-2 | 2.2 | 16 | 11 | 2.2 |
| NZ200-3R7G-2 | 3.7 | 17 | 16.5 | 3.7 |
| Input voltage(v):3PH AC 380V±15% | ||||
| NZ200-0R4G-4 | 0.4 | 3.4 | 1.2 | 0.4 |
| NZ200-0R75G-4 | 0.75 | 3.8 | 2.5 | 0.75 |
| NZ200-1R5G-4 | 1.5 | 5 | 3.7 | 1.5 |
| NZ200-2R2G-4 | 2.2 | 5.8 | 5 | 2.2 |
| NZ200-3R7G/5R5P-4 | 3.7 | 10.7 | 9 | 3.7 |
| NZ200-5R5G/7R5P-4 | 5.5 | 14.6 | 13 | 5.5 |
| NZ200-7R5G/11P-4 | 7.5 | 20 | 17 | 7.5 |
| NZ200-11G/15P-4 | 11 | 26 | 25 | 11 |
| NZ200-15G/18.5P-4 | 15 | 35 | 32 | 15 |
| NZ200-18.5G/22P-4 | 18.5 | 38 | 37 | 18.5 |
| NZ200-22G/30P-4 | 22 | 46 | 45 | 22 |
| NZ200-30G/37P-4 | 30 | 62 | 60 | 30 |
| NZ200-37G/45P-4 | 37 | 76 | 75 | 37 |
| NZ200-45G/55P-4 | 45 | 92 | 90 | 45 |
| NZ200-55G/75P-4 | 55 | 113 | 110 | 55 |
| NZ200-75G/90P-4 | 75 | 157 | 150 | 75 |
| NZ200-90G/110P-4 | 90 | 180 | 176 | 90 |
1:What is your MOQ?
1 PC.
2:What is terms of payment?
T/T 100% before delivery.
3:What is your delivery time?
Fast delivery is our advantage. Usually within ten days.
4:How can we do OEM/ODM?
We do OEM for more than 40 brands. If your order reaches a certain
quantity, we can do it for you.
