|
[China]
Trade Verify
Address: 15th Fl, Bldg No.13, National University Science Park(East), No.279, West 3# Ring Rd, Zhengzhou, China
Contact name:Andrew
Henan Zhengzhou Mining Machinery CO.Ltd |
|
Verified Suppliers
|
|
|
Calcined Sinter dolomite rotary kiln for cement plant
Rotary kiln is thermal equipment to heat materials. It is widely used in the fields of cement, nonferrous metallurgy, ferrous metallurgy, refractory material, chemical, and making-paper.
1. Support device: advanced shaft structure, automatic temperature
measuring device and electrical heating.
2. Catch wheel: including two kinds mechanical wheel and hydraulic
pressure.
3. Gears: single or double. Control the rotating speed by variable
motor, DE machine and frequency variable motor. Be reliable, energy
–saving, and efficient.
4. Cylinder tyre bolster: lower bolster has three types: fixed,
zoom and floating. The structure is simple, replacement is
convenient and won’t hurt cylinder.
5. Sealing equipment: there are many kinds for choice according to
kiln models, including air cylinder edge sealing, spring edge
sealing, and graphite block sealing and combination for above. The
feather is adaptive for cylinder rotating and swing. And sealing
effect is very good.
6. Kiln head hood: including stationary type and flexible type.
Rotary Kiln is usually working as following : The kiln is a cylindrical vessel, inclined slightly to the horizontal, which is rotated slowly about its axis. The raw material to be processed is fed into the upper end of the cylinder. While the kiln rotates, material gradually goes down towards the lower bottom, and may undergo a certain amount of stirring and mixing. Hot gases pass along the kiln, sometimes in the same direction as the process material (co-current), but usually in the opposite direction (counter-current). The hot gases may be generated in an external furnace, or may be generated by a flame inside the kiln. Such a flame is projected from a burner-pipe (or “firing pipe”) which acts like a large bunsen burner. The fuel for this may be gas, oil or pulverized coal.
Specifications:
| Spec | Output(t/h) | Rev(rpm) | Pedestal Number | Reducer | Electricmotor | Powe(kW) |
| Model | ||||||
| Ф1.6x32m | 2.0 | 0.58-2.85 | 3 | ZQ75-50 | YCT250-4A | 18.5 |
| Ф1.6/1.9x36m | 2.5-3.0 | 0.53-1.59 | 3 | ZQ110-7 | YCT250-4B | 22 |
| Ф1.9x39m | 3.0-3.4 | 0.53-1.59 | 3 | ZQ125-7 | YCT315-4A | 37 |
| Ф2.2x45m | 4.0-5.0 | 0.21-1.64 | 3 | hostZS125-5 | hostYCT315-4B | 45 |
| assistZQ40-40 | assistY112M-4 | 4 | ||||
| Ф3.2x50m | 1000 | 0.79-3.94 | 3 | hostNZS955-28VBR | hostZSN4-280-21B | 160 |
| assistZL50-9-2 | assistY180L-6 | 15 | ||||
| Ф3.2x64m | 8.0-10.0 | 0.40-1.50 | 4 | hostZL130-16 | hostZSN-280-11B | 190 |
| assistZL50-10 | assistY180L-4 | 22 | ||||
| Ф3.2x118m | 17.0 | 0.29-1.46 | 6 | hostJH500C-SW-71 | hostZ4-250-31 | 110 |
| assistZL50-8-1 | assistY160L-6 | 11 | ||||
| Ф3.3x50m | 1000 | 0.36-3.57 | 3 | hostNZS995-40-VBL | hostZSN4-280-21B | 160 |
| assist NZS352-31.5 | assistY160M-4 | 11 | ||||
| Ф3.8x58m | 20.8 | 0.4-1.5 | 3 | hostZSY500-40 | hostzsn-315-072 | 250 |
| assistZL50-14 | assisty180L-4 | 22 | ||||
| Ф4.0x60m | 25 | 0.4-1.5 | 3 | hostZSY630-35.5 | hostZSN4-355-092 | 315 |
| assistZL65-16 | assistY200L-4 | 30 | ||||
| Ф4.0x80m | 29.17 | 0316-1.528 | 4 | hostJH560C-SW-71 | hostZSN4-280-11B | 160 |
| assistZL50-9-1 | assistY180L-6 | 15 | ||||
| Ф4.0/3.5/4.0x150m | 30.4 | 0.34-1.71 | 6 | hostJH560C-SW-56-1/2 | hostZSN4-280-11B | 2X125 |
| assistZL50-10-1/2 | assistY160L-6 | 2X11 | ||||
| Ф4.0x150m | 33.3 | 0.51-1.53 | 6 | hostJH560C-SW-63-1/2 | hostZSN4-280-11B | 2X125 |
| assistZL60-12-1/2 | assistY160L-6 | 2X11 | ||||
| Ф4.0x150m | 30.0-34.0 | 0.40-1.59 | 6 | hostJH800C-SW-90 | hostZSN4-355-092 | 280 |
| assistJH280-SW-40 | assistY200L-4 | 30 | ||||
| Ф4.7x72m | 4000 | 0.35-3.50 | 3 | hostZSY710-28-V | hostZ4-400-32 | 550 |
| assistZL60-7-2 | assistY200L-4 | 30 |
