Suzhou Manyoung New Materials Co.,Ltd |
|
High hardness pollution-free zirconia ceramic mortar
Description:
Zirconia mortar is mainly used for grinding and analyzing a small
number of samples in the laboratory. It is used for grinding solid
substances or mixing powdered solids.
Application method:
Wash and dry the mortar, and then put the grinding material into
the bowl. First cover the mouth of the bowl with the left hand, and
gently crush the coarse material with the right hand glass pestle,
and then grind. Until the fineness is reached, the grinding
material is poured out from the mouth and continues to grind after
sifting the coarse grain. If you want to make a paste, you can also
use a mortar, the method is the same as above, but because of the
large contact surface of fine particles after grinding, the
dissolution speed is increased, after grinding, the yan distillate
water is directly added in the bowl, to be adjusted into a paste by
the tip of the tip, and finally washed with distilled water, the
washing liquid is also poured into the container.
Application of Advanced grinding, smooth, abrasion resistant, high hardness
zirconia mortar:
Ultrafine grinding equipment, fine chemical industry, electronic
paste, semiconductor, new energy, nano new materials, medical
instruments, precision casting, structural ceramics, refractory
materials, electronic communications, sensitive ceramics.
Technical Parameters:
Item | unit | Typical Values |
Composition | (wt%) | 94.8%ZrO2+5.2%Y2O3(wt%) |
Color | - | White |
Density | g/cm3 | 6.03 |
Water absorption | % | 0 |
flexure strength | MPa | 1250 |
HV hardness | GPa | 1300 |
Modulus of Elasticity | GPa | 210 |
Poisson's ratio | - | 0.31 |
fracture toughness | MPa m1/2 | 8-10 |
thermal expansivity | [normal temperature~400℃] x10-6 | 10.3 |
Thermal conductivity | W/(m.K) | 3 |
nitric acid(90%) | weight loss | 0 |
sulfuric acid(95%) | 0.03 | |
sodium hydroxide(30%) | 0.07 |
Advantages:
1. The product has no crack, no impurity and strong resistance to
wear.
2. The product has high gloss and strong corrosion resistance, and
can be used in acid grinding materials.
3. High purity and hardness, which meet the quality and
technical standards.
Advisories and Precautions:
1. In the process of use, special care should be taken to avoid
grinding substances with excessive hardness and contact with
hydrofluoric acid.
2. The mortar should not be heated, and should not be dried in the
electric oven.
3.Washing mortar, should be washed with water first, acid corrosion
resistant mortar can be washed with dilute hydrochloric acid. When
there is a hard-to-wash substance attached to
the mortar, put a small amount of salt into it and grind it before
washing it.
More Picture: