natural oiled 3 layers oak hardwood engineered flooring

Product    Description

3 layers oak hardwood engineered flooring 

The top, or ‘wear’ layer is 2-4mm thick and can be sanded up to 4 times. Yorking Hardwood uses only sawn lamellas for top layer because sawn hardwood veneers have no internal checks that might cause face splits in lamella later on. Sawn hardwood lamellas are 100% solid wood and preserve the rich grain texture appearance.

Middle layer is made of cross-laid interconnected solid birch bars. Thickness of the middle layer is 8-10 mm. Cork compensators are in order to and help to balance internal stress, increase dimensional stability of the plank and eliminate squeaking in floors. Bottom layer is 2 mm solid birch lamella.

Feature of 3 layer oak flooring from Yorking 

High-adhesion polyurethane glues are used to bond top hardwood veneer to plywood base. Extra strong bonding ensures that no delamination occurs even under elevated moisture conditions. Yorking Hardwood polyurethane adhesives are 100% formaldehyde free and are environmentally friendly.

Structure of 3 layer oak timber floor 

Compare with solid wood flooring

Product    Overviews

Remarks: 

1. Due to the camera settings,all products photos from Yorking Hardwood shall not be garanteed 100% same to our real wood floor.

 2. Natural wood color variations shall not be considered as quality problem and a short piece of wood plank can never be a full representation of our wood flooring overviews.Samples are needed to make sure you are purchasing the wood flooring with correct color effect. 

Company    Information