Active Member
|
[China]
Address: Room1421 . Greenland Business Building LOFT C. , new urban district , Xuzhou , Jiangsu
Contact name:Li
Xuzhou Yahong CNC Equipment Factory |
|
|
Automatic Portable CNC Flame Cutting Machine Effective Cutting Size1200*2000mm
Description:
1. Low noise and high running accuracy.
2. Occupies a small place.
3. Operates with high efficiency.
4. Cuts automatically with high precision and uses materials effectively.
5. It is of compacted design, light weight and is small in size.
6. It is easy to move, suitable for the site indoor or outdoor.
7. The control system is independently designed and developed with optimized programming, easy to learn and operate.
8. LCD screen of dynamic and static display of graphics can convert the CAD file to the programmed one in the computer and transmit it to the machine via a USB flash disk before automatic cutting performance which can also be made by inputting the simple instruction in the machine for programming cutting.
Cutting Metarials:
It is suitable for large, medium and small mines, widely used in automobile, shipbuilding, engineering machinery, agricultural machinery, suitable for carbon steel (flame cutting), and stainless steel.
Technical Parameters for Portable CNC Cutting Machine :
| 1 | Cutting shape | any shapes |
| 2 | LCD Display Dimension | 7.0Inches |
| 3 | Effective Cutting Width (X axis) | 1200mm |
| 4 | Effective Cutting Length (Y axis) | 2000mm |
| 5 | Cross Beam Length | 1700mm |
| 6 | Longitudinal Rail Length | 2500mm |
| 7 | Cutting Speed | 0-4000mm per minute |
| 8 | Plasma Cutting Thickness | 0.5--20mm ( Depends on plasma power source capacity) |
| 9 | Flame Cutting Thickness | 5--200mm |
| 10 | Drive Mode | single-side |
| 11 | Cutting Mode | flame and plasma |
| 12 | Ignition device | Auto ignition device |
| 13 | Height regulating device | Arc voltage height control (THC) or Electric adjustable high |
| 14 | File transmission | USB transmission |
| 15 | Gas Pressure | Max. 0.1Mpa |
| 16 | Oxygen Pressure | Max.0.7Mpa |
| 17 | Cutting Gas | Acetylene/Propane |
| 18 | Plasma Power Source | Yahong cut-100A,cut-130A, cut-200A or other |
| 19 | Plasma Air | Only pressed Air |
| 20 | Software | FastCAM Standard vision(support Auto CAD/ Solidworks/ CAXA/ Types etc.) |
| 21 | Plasma Air Pressure | Max. 0.8Mpa |
| 22 | Cutting precision | ±0.5mm National standard JB/T10045.3-99 |
| 23 | Control accuracy | ±0.01mm |
| 24 | Power Supply Voltage/Frequency | 220V 50HZ / 60HZ |
| 25 | Rated Power Supply | 200W |
| 26 | Working Temperature | -10℃-60℃, Relative Humidity, 0-95%. |
Our Service:
The equipment after technical service , the installing , operation , maintenance we supply good technical consulting service , user can through telephone or Web ( QQ , Skype ,Email ,remote assistance ,and other way ) to communicate with our technical department .
Portable CNC Cutting Machine:
