48 Core Fiber Optic Termination Box
The 48 core fiber optic termination box is designed to provide protection and organization for fiber optic cables and connectors. It has a rugged construction and enough space for cable routing, fusion splicing and storage of excess fiber lengths. It can hold up to 48 individual fibers, allowing for high-density fiber management.
1. Sturdy and durable
2. Impact resistant and corrosion resistant
3. Good sealing, waterproof
4. A variety of accessories to meet a variety of installation methods.Suitable for indoor and outdoor use.
Appliance
Fiber FTTH access network.
Telecommunication FDB Networks
Optical CATV Networks
Data communications FDP Networks
Local Aera NAP Joint Networks
The 48 core fiber optic termination box supports connectors and adapters appropriate for the type of fiber optic cable being used. Common connector types include SC, LC, and MPO/MTP, depending on the specific application requirements.
Fiber-optical stripping and fix
As per the requirement,open the hole-at the bottom of the box,then
install the seal rings As per the cable size to cut seal rings,
cable through the it Adjust the length of cable, keep extra cable
around 0.5m;
Clean the cable, cut the cable protector around 0.4m,keep armoured
part around 30mm,keep the fiber around 60mm; When strip the
cable,use insulating tape or heat shrink protector;
Put the fiber through the hole,fix it with clamp, then tighten the
screws.
Packaging and Transportation
|
|
The following is how the 48 core fiber optic termination box should be wrapped:
1. First place the product in anti-static bubble wrap or similar protective material to cushion it from any impact.
2. The packaged product will be placed in a sturdy cardboard box. to prevent the box from moving during transportation.
3. Any empty space inside the cardboard box is filled with additional packing material, such as foam, to provide further cushioning.
4. The cardboard box is then sealed with packing tape. Make sure to tape all seams securely to prevent the box from opening during transportation.
5. Finally, the box will be labeled with the product.
About transportation
We usually use DHL, FEDEX, UPS, EMS, TNT or Sea , these are the world's largest shipping companies, you can provide us with your courier account, we will help you choose the cheapest and the cheapest according to the quantity
Factory Show
Yingfeng's production scale allows us to provide product to clients in relatively short time. If the order quantity is small (less than 10,000 pieces), our normal delivery time would be within 7 days after placing order.
Main Products
1. Fiber Connector and Adapter
2.PLC Splitter, Patch Cord and Pigtail
3.Fiber Opitc Termination Box(Indoor)
4. Fiber Optic Distribution Box(Outdoor)
5. Fiber Optic Splice Closure
6. ODF and Fiber Optic Patch Panel,Fiber Tool and so on
Our Certificates
