|
[China]
Trade Verify
Address: Room 517, 5th Floor, Building 10B, Zone 3, Shenzhen Bay Science and Technology Ecological Park, Gaoxin South Ring Road, Shenzhen High tech Industrial Park (South District), Nanshan District, Shenzhen
Contact name:Yao
Yaoan (Shenzhen) Electronic Technology Development Co., Ltd. |
|
Verified Suppliers
|
|
|
YA-K210 Multifunction Large-Capacity Intelligent Gas Leak Monitor Detector Used For Multi-Channel Gas Alarm Controller
The YA-K210 gas alarm controller is an advanced solution that offers exceptional performance and reliability for industrial gas detection applications. When combined with our YA-D series gas detectors, it forms an intelligent control system that can elevate your gas detection efforts to the next level.
Designed for use in industrial environments, this gas detection and early warning system is equipped with a high-quality 7-inch industrial LCD screen that displays the concentration value of all connected gas detectors. The gas detectors can be connected to the controller using a branch line (4-20mA) or bus (485 bus), with support for up to 256 detectors.
The controller comes with advanced features such as low limit, high limit, fault, and shielding alarm functions. When an alarm is triggered, the corresponding alarm sound and light signal is emitted, and the location and time of the alarm are recorded for reference.
Each gas detector can be set up with low alarm, high alarm, and two sets of output relays to drive other equipment such as exhaust fans and solenoid valves. The alarm records can be exported through the U disk, and you can query the data with two groups of PC interfaces via the host computer.
The product follows national standards, ensuring rapid response, low failure rate, and easy maintenance. It is designed for wall-mounted installation, and can work seamlessly with connected detectors to deliver data display, output control, and other essential features.
The YA-K210 gas alarm controller host is equipped with an embedded microprocessor that offers detector signal sampling, data real-time calculation, system fault detection, power management, key scanning, display driver, alarm display, fault display, shield display, data storage, data export, 4G networking, alarm peripheral driver, and other functions.
The YA-K210 gas alarm controller supports both μmol/mol and mg/m³ units, which can be switched based on individual needs.
The controller features 2 groups of common relays and 6 groups of programmable relays that offer passive output. If necessary, external relay linkage modules can be connected to the controller to enhance its functionality.
The YA-K210 gas alarm controller supports mainstream communication methods, which include 4-20mA, RS485, LoRa, 4G, and PC connectivity.
The controller offers real-time monitoring of measured gas concentration levels in the detection area. If the gas concentration reaches or exceeds the set alarm value, the controller sends out accompanying acoustic and optical alarm signals.
When the preset logic relationship is satisfied, the connected external device embedded in the controller can act independently based on pre-programmed instructions.
The controller power supply uses 220V 50Hz AC, and the backup power uses two 12V/9Ah batteries. Record separation, fault, alarm, automatic screening, and separation of system records occur, with a total number of stored records up to 2000. U disk export is used to transfer the data to the controller.
| Power source |
|
| Power | ≤20W； |
| Output supply voltage | DC24V±25% |
| Matching detector model | YA-D series |
| Number of connected detectors |
|
| Indication mode |
|
| Alarm mode | Sound (sound pressure level at a distance of 1 meter above 70dB, 115dB below), light, voice broadcast alarm |
| Response time (T90) | ≤30 seconds |
| Contact output | Passive contact capacity 7A/250V, 8 on-board (Multiple expansion boards can be connected, and each expansion board supports 4 signals) |
| Explosion-proof mark | Non-explosion proof |
| Class of protection | IP30 |
| Working temperature and humidity | -20～50℃；<95%RH |
| weight | ≤10kg |
| Detector and controller cable requirements |
|
| Communication distance between detector and controller | ≤1200m |
| Output signal | 4-20mA, RS485, LoRa, 4G, PC |
| Installation mode | wall-mounted |
| Overall dimension | 590*380*140mm |
The YA-K210 Gas Alarm Controller is suitable for various application occasions and scenarios. It can be used in industrial settings, such as chemical plants, oil refineries, and gas pipelines, to detect and control the levels of combustible gases in the air. It is also suitable for commercial and residential spaces, such as parking garages, kitchens, and laboratories, where gas leaks could pose a danger to people's health and safety.
The Gas Alarm Controller is equipped with RS485 and 4-20mA output signals, which allow it to communicate with other devices and systems, such as computers, alarms, and remote monitors. The Gas Alarm Controller supports a maximum of eight 4-20 MA inputs and 99 RS485 data inputs, which make it easy to connect multiple detectors and sensors to the system.
The YA-K210 Gas Alarm Controller is designed to operate in a wide range of temperatures, from -20℃ to 50℃, with a relative humidity of less than 95%. It is a durable and reliable product, backed by a one-year warranty.
The Gas Alarm Controller is a critical component of any gas detection and control system. It provides a centralized platform for monitoring and managing the readings from multiple detectors and sensors. It is easy to install and operate, and it can be customized to meet the specific needs of different applications.
In summary, the YA-K210 Gas Alarm Controller is an essential product for explosive and flammable gas monitoring. It is suitable for various application occasions and scenarios, from industrial settings to commercial and residential spaces. It is backed by a one-year warranty and is designed to operate in a wide range of temperatures and humidity levels. The Gas Alarm Controller is a reliable and efficient solution for gas detection and control, and we recommend using it in combination with the YA-D Detectors Series for optimal performance.
Q: What is the brand name of this Gas Alarm Controller?
A: The brand name of this Gas Alarm Controller is YAOAN.
Q: What is the model number of this Gas Alarm Controller?
A: The model number of this Gas Alarm Controller is YA-K210.
Q: Where is this Gas Alarm Controller manufactured?
A: This Gas Alarm Controller is manufactured in Shandong, China.
Q: What type of gas does this Gas Alarm Controller detect?
A: This Gas Alarm Controller can detect various types of gases, such as natural gas, liquefied petroleum gas, and coal gas.
Q: How many gas sensors does this Gas Alarm Controller have?
A: This Gas Alarm Controller has two gas sensors, which can detect gas leaks in two different locations.
