Shandong Xiangtong Rubber Science Co.,Ltd |
Verified Suppliers
|
|
Steel Cord Flame Resistant Conveyor Belts are suitable for
conveying materials in flame resistant and anti-explosion
occasions, especially in underground coalmines.
Characteristics
Except the advantages of conveying materials at the occasion of
high strength, long distance and large load as the steel cord
conveyor belt, the steel cord flame resistant conveyor belt shall
meet the safety requirements blow.
Items | Indexes | ||
Anti-static property | Average electrical resistance of both surfaces (Ω) | 3*10⁸ | |
Drum friction | Surface temperature of drum (℃ ) | ≤325 | |
Any test piece shall not show any sign of flame or glow | |||
Burning on spirit burner (flame or glow) |
Burning with cover rubber | Average duration of lame for six test piece(S) | ≤3 |
Duration of flame for any individual test piece (S) | ≤10 | ||
Burning without cover rubber | Average duration of flame for six test piece(S) | ≤5 | |
Duration of flame for any individual test Piece(S) | ≤15 | ||
Burning on propane burner | Length that is completely undamaged by flame .mm | ≥600mm |
Standard Specifications
Model | Tensile Strength(N/mm) | Cord Pitch (mm) | Cord Diameter (mm) | Min Cover thickness (mm) | Width (mm) |
ST630 | 630 | 10 | 3 | 4 | 800-2400 |
ST800 | 800 | 10 | 3.5 | 4 | |
ST1000 | 1000 | 12 | 4 | 4 | |
ST1250 | 1250 | 12 | 4.5 | 4 | |
ST1600 | 1600 | 12 | 5 | 4 | |
ST2000 | 2000 | 12 | 6 | 4 | |
ST2500 | 2500 | 15 | 7.2 | 5 | |
ST3150 | 3150 | 15 | 8.1 | 5.5 | |
ST3500 | 3500 | 15 | 8.6 | 6 | |
ST4000 | 4000 | 15 | 8.9 | 6.5 | |
ST4500 | 4500 | 16 | 9.7 | 7 | |
ST5000 | 5000 | 17 | 10.9 | 7.5 | |
ST5400 | 5400 | 17 | 11.3 | 8 | |
ST6300 | 6300 | 19.5 | 12.8 | 10 | |
ST7000 | 7000 | 19.5 | 13.5 | 10 | |
ST7500 | 7500 | 21 | 15 | 10 |
Note: Cover thickness, cord diameter, and cord pitch can be
manufactured according to customer’s requirements.
Rubber Covers
Flame resistance for mines: suitable for conveying flammable and
combustible dangerous materials. The average value of burning test
shall be less than 10s, and the single value shall be less than
15s. Besides, it has to pass the drum friction test and tunnel
propane combustion test.
Standard | Tensile Strength min. Mpa | Elongation at break min. % | Abrasion max. mm³ |
MT668 | 15 | 350 | 200 |