Shandong Xiangtong Rubber Science Co.,Ltd |
Verified Suppliers
|
|
Usage
This conveyor belts are widely by the mining and processing industries for transporting bulk or lumpy materials such as aggregates, sand, clinker, ore, chemicals, coke, crops, construction materials and much more.
1.Textile belt construction
2.Two to six EP or NN fabric plies
3.Supplied either with cut or moulded edges
Characteristics
Benefits
It can be combined with any type of cover grade to make it a perfect match to almost any application. This allows it to convey basically any type of product in any environment, from fine powders to large lumps, from dry to greasy materials, from extremely cold to very hot conditions.
Technical Details
This conveyor belts can be produced in multiple nominal belt
strength classes, guaranteeing:
1.High longitudinal and transverse breaking strength
2.Transversal flexibility for excellent troughing and ply adhesion
NN fabric
- High stability
- Short pulley diameter
- High heat resistance
- Strong anti-shock
- Excellent adhesive force to rubber
EP fabric
- Low elongation
- Strong anti-shock
- Excellent adhesive force to rubber
- High stability
- Temperature≤140℃
(It will decompose over 140℃)
Standard Specifications
Strength(KN/m) | No. Of Piles | Carcass Type | Belt Width |
300 | 2-4 | NN/EP |
500-2400mm |
400 | 2-4 | NN/EP | |
500 | 2-5 | NN/EP | |
630 | 3-6 | NN/EP | |
800 | 3-6 | NN/EP | |
1000 | 3-6 | NN/EP | |
1250 | 3-6 | NN/EP | |
1400 | 3-6 | NN/EP | |
1600 | 4-6 | NN/EP | |
2000 | 4-6 | NN/EP |
Note: It can be customized according to customers’ requirements.
Covers grades
In accordance with ISO14890-2013 standard
Grade | Tensile strength min. (ISO37) Mpa | Elongation at break (ISO37) % | Abrasion max. (ISO4649) mm³ |
H | 24 | 450 | 120 |
D | 18 | 400 | 100 |
L | 15 | 350 | 200 |
The values will help to determine the appropriate cover compound for the application or for the materials carries. Reliable assessment of the behavior of the covers in service for wear and cut resistance cannot be determined from tensile strength, and abrasion values alone.