Nanyang Jiuding Material Technology Co., Ltd. |
Verified Suppliers
|
|
195 Microns Medical X Ray Film Blue Polyester Thermal Dry X Ray Film For Agfa Printer
[ Product description ]
The film is thermal sensitive medical dry film for radiology Dept. and digitally store after computer processing of medical imaging thermal printing, can accurately through the computer processing of all kinds of medical imaging, get rid of the traditional silver halide product show fixing bath processing program, eliminate the flushing processing waste liquid pollution to the environment.
Product name | Thermal medical dry film |
Material | PET |
Appearance | Blue transparent |
Sheet size | 8x10 10x12 11x14 14x17inch |
Compatible printer | Fuji 3500, Agfa 5302 ,etc. |
Usage | CR,DR, CT, MRI, x-ray image output. |
Safe light | It can be processed under room light condition. |
[ Features ]
1.Environmental protection: PET material, environmental protection concept, green products.
2.Can be normal operation under normal lighting conditions.
3.Prime PET based materials with high resolution.
[Applicable printer model]
Agfa 5302,Fuji drypix 2000/3500/lite printer.
The compatibility should be tested when using other printers.
[Precautions for saving use]
1. Take care to prevent direct sunlight from igniting the coating.
2. Keep the temperature at 10 °C - 23 °C, relative humidity 30% - 65%, and keep away from heat.
3. Try to be cool, dry, and dust-free in the room. Even the fine dust will affect the printing effect of the film.
4. There should be no acid or alkaline gases such as hydrogen sulfide, ammonia, sulfur dioxide, and formaldehyde in the storage room.
5. The stacking method should avoid excessive ballasting of gravity and use vertical shelf storage to prevent the long-term heavy pressure coating from separating from the substrate.
6 When using, be careful not to mistake the printed surface of the film, and do not touch the printed surface of the film with wet hands, so as not to cause the printing coating to not receive the ink well.