Ultrasonic Blank Face Mask Making Machine 3 Ply Touch Screen Control

Ultrasonic Blank Face Mask Making Machine 3 Ply Touch Screen Control

Face Mask Making Machine Introduction

This production line is a tow two automatic mask machine.
One body machine drives two ear belt machines. The body machine
will be connected to the two ear tape welding machines. When the
mask body is made, the conveyor belt will send it to the ear belt
welding machine for the fusion of the ear belt part, thus completing
the production of an ear mask product.

Face Mask Making Machine characteristics

1. The equipment is equipped with a maximum of 6 sets of cloth unwinding and a roll diameter of 600mm;
2. The cloth unwinding adopts the active unwinding method, which automatically unwinds according to the position of the tension roller;
3. Nose strip welding module: Contains nose strip unwinding, nose strip leveling, fixed length conveying, cutting and welding functions;
4. cloth composite roll welding unit: using ultrasonic welding head and steel mold welding method, the parallelism of the roller, the position can be precisely adjusted during welding, the welding system has cooling

Face Mask Making Machine Parameters

1. Equipment weight: ≤6000kg, ground load ≤500KG / m2;
2. Working power: equipment 220V, 50HZ, rated power about 15KW;
3. Compressed air: 0.5 ~ 0.7 MPa, using flow rate of about 300L / min;
4. Operating environment: temperature 10 ~ 35C, humidity 5-35% HR, no flammable
5. and corrosive gas, no dust (purity is not less than 100,000)

the main configuration:

Details