Wuxi Zhongxin Special Steel Co.,Ltd. |
|
Product Description
20# is a simple way of writing 20 steel, which is a kind of material in steel. Commonly used in the manufacture of seamless steel pipes, molds, high-quality carbon steel plates, channel steels, I-beams and other steels.
Chemical composition
The carbon content in this material is about 0.2%. This material is
also more common than other high-quality carbon steels.
average carbon content is 0.17-0.23%, the average silicon
content is 0.15-0.40%,
The average manganese content is 0.6-1.00%, the average sulfur
content is less than or equal to 0.010%, and the average phosphorus
content is less than or equal to 0.025%.
Mechanical behavior
Grade | Sample blank size(mm) | Recommended heat treatment(℃) | Mechanical properties | Hardness of steel as delivered HB10/3000 no greater than | |||||||
normalizing |
Quenching
|
tempered
| tensile strength(Mpa) | Yield point(Mpa) | Elongation rate(%) | Shrinkage(%) | Impact energy(J) | ||||
20# | 25 | 910 | 410 | 245 | 25 | 55 |
156 |
characteristic of 20#
The steel belongs to high quality low carbon carbon steel, cold
extrusion, carburizing and hardening steel. The steel has low
strength, good toughness, plasticity and weldability. The tensile
strength is 253-500MPa, and the elongation is ≥24%.
Normalizing can promote the spheroidization of the steel, refine
the bulk pro-eutectoid ferrite, and improve the cutting performance
of the blank smaller than 160HBS.
The process route of the steel mold parts is: blanking → forging
die blanks → annealing → mechanical roughing → cold extrusion
molding → recrystallization annealing → mechanical finishing →
carburizing → quenching, tempering → grinding and polishing →
assembly.
(2) Supply state and hardness Unheated state, hardness ≤ 156HBS.
(3) Chemical composition of standard JB/T 6057-92 steel (mass
fraction, %)
C 0.17~0.23, Si 0.17~0.37, Mn 0.35~0.65, P≤0.035, S≤0.035, Ni≤0.30, Cr≤0.15 , Cu≤0.25.
Product Photo
Packing and Delivery