|
[China]
Trade Verify
Address: East GenGuan Tun Industrial District,Anping,Hebei,China 053600
Contact name:Jack Tian
Anping Kingdelong Wire Mesh Co.,Ltd |
|
Verified Suppliers
|
|
|
Inconel600 Woven Wire Mesh Used in High-Temperature Environments
Inconel is a nickel-chromium alloy, which can offer great
resistance to corrosion and high temperatures. So, it is normally
used in a wide range of severe environments, where is high
temperature, with various alkaline salt solutions, caustic,
oxidizing, sulfur compounds and etc.
With these advantages, Inconel alloy wire mesh is widely used in chemical processing, pressure valve, and heat exchanger applications. Inconel 600, Inconel 601(with added Aluminum), and Inconel 625 (with added Molybdenum and Niobium) are the very common Inconel material for wire mesh; the difference between these grades is in their individual chemical composition. The addition of some elements will impact its characteristics in different environments.
Here below are the special chemical compositions of the common Inconel alloys.
| Typical Inconel Alloy Chemical Composition (%) | |||||||||||||||
| Grade | Al | C | Cb | Co | Cr | Cu | Fe | Mn | Mo | Nb | Ni | P | S | Si | Ti |
| 600 | / | 0.15 | / | / | 14.0-17.0 | 0.5 | 6.0-10.0 | 1 | / | / | 72 | / | 0.015 | 0.5 | / |
| 601 | 1.0-1.7 | 0.1 | / | / | 21.0-25.0 | 1 | Balance | 1 | / | / | 58.0-63.0 | / | 0.015 | 0.5 | / |
| 625 | 0.4 | 0.1 | 3.15-4.15 | 1 | 20.0-23.0 | / | 5 | 0.5 | 8.0-10.0 | 3.15-4.15 | Balance | 0.015 | 0.015 | 0.5 | 0.4 |
Inconel 600 can be used in environments with temperatures ranging from cryogenic to 2050°F. Its high nickel (~76%) content gives Alloy 600 wire cloth excellent resistance to alkaline solutions, reducing conditions, chloride stress-corrosion cracking, and a wide array of inorganic and organic compounds. Its high chromium (~15.5%) content gives Inconel 600 wire mesh good resistance to various alkaline salt solutions, caustic environments, oxidizing environments, and sulfur compounds.
Industries and Applications
Inconel 600 wire mesh is principally used in high-temperature
environments that also present corrosive, oxidizing, or reducing
agents. And also, Alloy 600 is widely used in heat-treating
equipment, muffle furnaces, nuclear steam, and generator equipment.
Besides, it could also be used in electronic components, chemical
and food processing, gas turbine components,
pulp, paper-making processing, etc.
Here are some very normal specifications of the Inconel600 woven
wire mesh for your reference.
Other specifications and sizes are made to order. Please contact
our sales team to discuss this.
| Mesh No. | Wire Diam./MM | APERTURE/MM | Open Area % | Weight kg/sqm |
| 4x4 | 1.25 | 5.1 | 64.5 | 3.125 |
| 5x5 | 1 | 4.08 | 64.5 | 2.5 |
| 6x6 | 0.8 | 3.43 | 65.75 | 1.92 |
| 8x8 | 0.7 | 2.48 | 60.82 | 1.96 |
| 10x10 | 0.6 | 1.94 | 58.34 | 1.8 |
| 12x12 | 0.4 | 1.72 | 65.82 | 0.96 |
| 12x12 | 0.6 | 1.52 | 51.41 | 2.16 |
| 14x14 | 0.3 | 1.51 | 69.6 | 0.63 |
| 16x16 | 0.25 | 1.34 | 71.03 | 0.5 |
| 18x18 | 0.3 | 1.11 | 61.97 | 0.81 |
| 20x20 | 0.3 | 0.97 | 58.34 | 0.9 |
| 25x25 | 0.3 | 0.72 | 49.83 | 1.125 |
| 30x30 | 0.23 | 0.62 | 53.2 | 0.794 |
| 40x40 | 0.2 | 0.44 | 47.27 | 0.8 |
| 50x50 | 0.2 | 0.31 | 36.95 | 1 |
| 60x60 | 0.15 | 0.27 | 41.33 | 0.675 |
| 80x80 | 0.12 | 0.2 | 39.06 | 0.576 |
| 100x100 | 0.1 | 0.154 | 36.76 | 0.5 |
| 120x120 | 0.081 | 0.131 | 38.18 | 0.394 |
Attention
Be careful of the cutting sharp edge, and avoid getting hurt while
open and use.
Before you order your mesh, please first check out our stock list,
where we put our over-run bargain rolls at lower prices.
For your reference, some photos of our products and factory are listed here, please check.
