Active Member
|
[China]
Address: No.469, 13th Floor, No.4 Building, No.89 Science Avenue, High -Tech Zone, Zhengzhou, China
Contact name:Nancy Young
Zhengzhou The Right Time Import And Export Co., Ltd. |
|
|
Automatic Edge Bander Machine With Six Functions For Mdf Plywood
Product Description:
The through feed edge banding machine mainly has the following 6 functions:Rubberizing, end trimming, rough trimming, fine trimming, scraping, buffing.
It is a special machine specially used for edge banding of panel-type custom furniture. It completely replaces the traditional manual edge banding machine and gets rid of the dependence of traditional manual machines on workers. By combining with special production design software, it can truly realize intelligent production. Save labor and time!
The automatic edge banding machine is more suitable for edge banding of medium-density fiberboard, blockboard, solid wood board, particleboard, polymer door panel, plywood and other large and medium-sized furniture, cabinets and other panel furniture manufacturers.
| Name | Automatic Edge Bander Machine With Six Functions For Mdf Plywood |
| Model | ZDS-368 |
| Working pressure | 0.6Mpa |
| Panel thickness | 10-60mm |
| Edge thickness | 0.4-3mm |
| Min. panel | 300*60mm |
| Voltage | 380V-3HP |
| Power | 9.65kw |
| Weight | 1400kg |
| Dimensions | 4570*900*1600mm |
PLC intelligent control, independent liquid crystal display can see the running process of the machine more clearly and comprehensively, which is convenient, quick and easy to use, real-time monitoring, real-time adjustment, more accurate, high-efficiency production, and the edge sealing effect is not compromised.
The edge-sealing gluing device heats the sol through the gluing pot, and adopts the spiral structure to deliver the glue. The gluing speed is fast, uniform, and the adhesive force is firm.
The end trimming device, through the structure of automatic mold tracking and high-frequency high-speed motor, ensures that the cut surface is smooth and smooth, and has the protection function of flushing the plate to enhance the stability of the flush.
Rough trimming device, the cutter at the rough trimming part is a flat knife, which is used to trim the excess edge sealing material on the upper and lower parts of the edge banding of the processed sheet.
Finishing device, the finishing knife is R2 inclined knife, which can leave 5-6 wire allowance for the next scraping process. The automatic tracking of the mold and the high-frequency motor are used to achieve fast cutting, and the R2 inclined knife is used to repair the radian.
The polishing device cleans the processed plate with a cotton polishing wheel, removes excess glue stains, and makes the edge banding section smoother and tidy through polishing.
