Shuttleless Rapier Loom Stainless Steel Crimped Wire Mesh Weaving
Machine
Summary
Our machines mainly divided into Light type machine and Heavy type
machine.Could produce wire diameter range from 0.025mm to 1mm and
width 1300mm-2600mm.
Characteristics
- Single motor control
- Automatic compensation of longitude wire and mesh rolling.
- Automatic stop and alarm for broken warp wire and weft wire.
- Fit to weave soft black steel wire, stainless steel wire copper
wire etc.
- Adaptability to metal wires: Adapt to various imported and domestic
metal wires.
- Large adjust range: The metal Wire screen can be woven 14 -- 400
square mesh. but also special Kinds up to
2600 mesh, such as plain weaving, twill weaving. mat weaving
and taper contrast high density screen weaving , etc, and
Have advantage over products of other machines. - The machine adopts technique of shuttleless and
straightway weft leading, automatic warp feeding and winding.
Sheddings are smaller, and surfaces of woven screens are
smooth, and there is not any bright spot, bright trace and
other
defects on fine screens. The machine can make high-grade in the
standard of , GB/T 5330 - 2003 - Lower center Of gravity. good stability. Low noise and energy
consunption, high ettciency.
- Rational design,simple construction, easy to operate and
maintain.
ZWJ-1300 Technical parameter
Wire diameter(mm) | 0.025-0.20 |
Mesh | 40-400mesh |
Max Mesh width(mm) | 1300 |
Weave type | Plain and Twill |
Weaving speed/hour | 75-78Times/minutes |
Rated voltage(v) | 380/220 2.2KW |
weight(kg) | 2800 |
Outside size(mm) | 2600*2800*1200 |
Picture
![](http://img.everychina.com/nimg/bb/da/219c791ac090b8e25313b418045f.jpg)