Home Companies Ruixin Energy Equipmnet

2inch SB Type Pulling Tool Catch Distance 31mm Wireline Slickline Tools

Contact Us

[China]

Trade Verify

Address: Room 1901, Block A, Saigao District Building, Feng Cheng Five Road, Xi 'an Economic and Technological Development Zone, Shaanxi Province

Contact name:Selina Qiang

Ruixin Energy Equipmnet

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

2inch SB Type Pulling Tool Catch Distance 31mm Wireline Slickline Tools

Country/Region	china
City & Province	baoji Shaanxi
Categories	Tool Design Services

Product Details

2inch SB Type Pulling Tool Catch istance 31mm Wireline Slickline Tools

Product overview

The SB Pulling Tool and pulling tool is an external casting and pulling tool .

The external fishing neck can be grasped by the special dog and can be jolted downward to release the hand. According to the catch distance can be divided into SB, SS two kinds.

Assembly method

1. The auxiliary spring and the spring seat (or sleeve) in turn into the outer cylinder;

2. Press down the spring seat with a screwdriver or slender iron, and put the fishing claw into the slot of the outer cylinder respectively;

3. Load the mandrel;

4. Install the main spring and pressure cap into the outer cylinder in turn;

5. Rotate the mandrel so that the hole near the big end of the mandrel is aligned with the hole of the outer cylinder, and insert a thin iron bar;

6. Stick a flat file or a thin sheet in the slot at the back of the pressure cap and tighten the pressure cap;

7. Install the sheath, screw the upper connector; 8. Install the pin using the pin mounting tool.

Pulling operation steps

1. Connect the pulling tool to the basic tool string and go down the well;

2. Slowly lower the tool string when it reaches the predetermined position;

3. Wait for the tool to grasp the external fish neck and jolt upward;

4. When it cannot be jolted up, it can be jolted down.

After pulling out the tool, insert the card release tool or screwdriver into the card release place, pry open the fishing dogs and make the fishing dogs open to release the tool.

Before inserting the tool, check that the thread at the tool connection is not loose.

Technical specification

Size	Fishing neck	Connection Thread	Fishing diameter	Catch Distance
1.5″	1.187″	Top connection15/16-11UN·Bottomconnection3/8-16UN	1.187″	33mm
2″	1.375″	Top connection15/16-10UN,Bottomconnection 1/2-13UN	1.375″	31mm
2.5″	1.375″	Top connection15/16-10UN,Bottomconnection 1/2-13UN	1.75″	32.6mm
3″	2.313″	Top connection1-1/16-10UN Bottomconnection5/8-11UN	2.313″	28.1mm
3.5″	2.313″	Top connection1-1/16-10UN,Bottomconnection1-1/4-11UN	2.75″	42.9mm
4″	2.313″	Top connection1-1/16-10UN,Bottomconnection1-1/4-14UN	3.125″	38.1mm

Any size can be customized according to customer requirements.

◆About Baoji RuiXin Slickline Tools

Baoji Ruixin Energy Equipment Co., Ltd. was established in 2012. It is an IS0: 9001-2015 and API Q1 system certified technology research and development organization specializing in the design and manufacture of steel wire, cable and coiled tubing tools. With strong new product research and development capabilities, it has obtained 12 national utility model patent certificates and 1 invention patent certificate. Undertook two prefecture-level and provincial-level scientific research projects. Our products include wireline wireline wellhead blowout prevention equipment, wireline downhole tools and coiled tubing downhole tools. At present, we have provided professional equipment and technical support to more than 50 oilfield service companies in various regions at home and abroad.

◆Strict quality control system

Steel wire working tools are certified by API, and all manufacturing are strictly in accordance with API system, including quality control management, environmental management and occupational health and safety management. For each wire working tool and each part, we have achieved traceability from raw materials, production process to product shipment.

◆Hard work, after-sales service

On-site technical guidance exchanges with each other. Our sales and technical personnel communicated well with front-line engineers and technical experts on the job site, and solved technical problems such as material selection, sealing structure optimization, and accident handling in complex environments. And carried out many technical exchanges and friendly cooperation. We have done a good job of product after-sales service for customers, and we provide customers with more satisfactory services. We would like to thank more and more customers for their support and trust. In the future, we will do better.

Welcome to contact us at any time.