|
[China]
Trade Verify
Address: 701, Yongchang Building, Xicheng Industrial Zone, Xixiang, Bao'an District, Shenzhen, China 518126
Contact name:Sunny
Shenzhen Qianhai Lensen Technology Co., Ltd |
|
Verified Suppliers
|
|
|
6-layers PCB with HDI High Quality PCB Factory PCBA SMT
As a professional manufacturer of printed circuit board, our PCB factory has been focusing on the production of PCB for more than 16 years.
So here we recommend it you. Welcome to contact us and send your inquiry if you need PCB, PCBA service.
Details
Product name: 6-layers PCB with HDI
Board thickness: 2.0mm
Layer: 6 layers
Surface treatment: Immersion gold
Min. circuit space:0.1/0.1mm
Min. whole size: 0.25mm
Peculiarity: high density and interconnection
Ability
| Item | Technical Parameters | Remarks | ||
| Min. Line Width(mil) | 3/4 | Partial 3mil lines is allowed | ||
| Min. Space(mil) | 3/4 | Partial 3mil lines is allowed | ||
| Min. Annular Ring Width(mil) | VIAS:3mil | Remained ring width means the distance between the hole edge to the ring outskirt | ||
| Component Holes: 6mils | ||||
Min. Hole Size
| Board Thickness<2.0mm | 0.1mm | Refers to the finished hole | |
| Board Thickness>=2.0mm | Aspect Ratio<=12 | Refers to the finished hole | ||
| Max. Board Thickness | Single and Double Sided | 5.0mm | ||
| Multilayer | 5.0mm | |||
Min. Board Thickness
| Single and Double Sided | 0.2mm | ||
| Multilayer | 4 layers:0.4mm, 6 layers: 0.7mm, 8 layers:1.1mm, 10 layers:1.6mm | |||
| Max. Board Size | Single and Double Sided | 650 x 1100mm | ||
| Multilayer | 650 x 1100mm | |||
| Distance between Line to Board edge | Outline:0.25mm | |||
| V-CUT: 0.4mm | ||||
| Max. Layers | 18 layers | |||
| Solder mask | Mask Window(mil) | 2/4 | ||
| Mask Bridge(mil) | 6 | |||
| Color | Green Yellow Red Blue White Black | |||
| Legend | Min. Line Width(mil) | 5/8 | ||
| Color | White, Black, Yellow, ect. | |||
| Surface Plating | HAL(with Pb free), Plated Ni/Au, Ag, Imm Ni/Au, Imm Sn, Ag, OSP etc. | |||
| Finished Board Thickness Tolerance: | 0.2mm<T<0.5mm: ± 0.05mm; T<0.8mm: ±10% T≥0.8mm, ±8% | |||
