|
[China]
Trade Verify
Address: 701, Yongchang Building, Xicheng Industrial Zone, Xixiang, Bao'an District, Shenzhen, China 518126
Contact name:Sunny
Shenzhen Qianhai Lensen Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Digital Input Wireless Modbus RTU 2km Wireless Pump Control 868MHz Wireless Lora Module
1. LS-RDIO series module general introduction
LS-RDIO Modbus RTU is an industrial controller designed by Lensen Technology. It supports point to point, point to multi-points wireless DI, DO collection and control. The transceiver inside adopts Lora technology which has the advantage of low power, long range. Lensen wireless I/O modules are easy to install, no program required, no communication fee. It is reliable and cost-effective substitution for rail signal cable, slip ring signal wire. LS-RDIO0202 has 2 inputs 2 relay outputs and 1 RS485 (wireless RS485 is customized).
2. Application Field
LS-RDIO series I/O module is widely used in industry automation like factory central data process, pump control, tank level monitoring, Conveyor Control, oil monitoring, mining machinery, environment monitoring equipment, lifting devices, robots control, filling machine, mixing equipment, logistic line, AGV etc.
3. LS-RDIO0202 Parameter
| Parameter | |
| Power output: | 600mW |
| Wireless technology: | Lora |
| Power supply: | 9V-30V (usually choose 24V DC or 12V DC) |
| Control distance: | 5km LOS |
| Baud rate: | 2400bps |
| Receiving sensibility: | -123dBm@1200bps, -118dbm(9600bps) |
| Networking | |
| Networking: | Point to point and point to multipoint |
| Protocol: | Modbus RTU protocol |
| Port Description | |
| Input: | 2 active inputs (passive customize), isolated |
| Output: | 2 passive relay outputs, isolated contact max load AC250V/5A,DC30V/5A (active outputs 0-5V customize) |
| Communication port | RS485 (wireless RS485 customize) |
| Current | |
| Transmit current: | <350mA |
| Receiving current: | <20mA |
| General | |
| Frequency: | 915MHz |
| Channel No: | 16 channels, can change via DIP switch |
| Physical Properties | |
| Dimension: | 115×90×40(mm) |
| Antenna Connector: | SMA,vehicle antenna with 1.5m cable |
| Temperature: | -35℃~+75℃( industrial) |
| Mounting method: | Standard 3.5 inch industrial guild rail |
Features:
Switches ON the pump when the water in the overhead tank goes low level.
Switches OFF the pump when the water in the overhead tank reaches high level.
DI, DO, Power and Communication LED Lights.
Wireless connection, no need to switch ON/OFF the pump manually.
No more overflow thus saving water electricity & manpower.
Easy installation. Can do it by yourself.
No communication fee.
Hardware needed:
1. 24V DC Power supply (12V customize)
2. Float switch (with high and low level)
3. LS-RDIO0202 (with antenna)
4. Pump
5. Solid state relay
System diagram
When water level low, pump ON. When water level high, pump OFF
