|
[China]
Trade Verify
Address: Floor 20,Wangjiao building,North xinshi road,Shijiazhuang,Hebei,China
Contact name:Ada Wong
Hebei Reking Wire Mesh Co.,Ltd |
|
Verified Suppliers
|
|
|
1m-3.6m Wide Polyester Dryer Mesh Belt Dryer Belt Equipment Sludge Dewater Mesh Screen Belt
Introduction:
Polyester Sludge Dewatering belt is also called Press-filter fabrics which is mainly used for sludge dehydration, paper pulp and juice squeeze, mine smelting, mine tailing disposal and other pressure filtration industries.
The polyester sludge dewatering belt have the characteristics of good water permeability, air permeability and non-revealed sludge,acid-resisting and alkali-resisting. Because of theirs designing structure, the sludge can be peel off easily from the filter cake, so the screen are easily cleaned and have a long working time. Mainly matching with belt type filter press, vacuum rubber belt filter and horizontal vacuum belt filter.
How to connection:
The edges of the sieve are smoothed by thermal sealing, reinforced in a width of about 4 cm with a two-component flexible adhesive. The sieves are connected into an endless strip by a demountable stainless steel (AISI 316) clipper joint. Another option for connecting the sieve into an endless strip is a woven non-separable joint, which has a longer service life than the clip joint, but can only be used on machines that allow the installation of an endless belt.
Advantages
1. Made from mixed monofilaments and multi-filaments.
2. Strong and work stable.
3. Good permeability.
4. High production efficiency.
5. Can change permeability of belts according to customer's requirement.
6. Lower percentage of moisture,easy to peel off filter cake.
7. Take high-viscosity polyester filaments as material,make products with good abrasive resistance and intensity.
8. Belt can be easily regenerated and reused.
9. Choosing stainless steel clip joint for it,which makes it stronger and using long time
Type
| Wire Diameter(mm) | Density/cm | Strength(N/cm) Tensile strength |
Weight kg/m2 |
Thickness mm |
CFM 127/pa | |||
Warp |
Weft |
Warp |
Weft |
Surface |
Joint | ||||
| RK31505 | 0.40 | 0.50 | 33 | 9 | 1600 | 900 | 0.80 | 1.30 | 186 |
| RK26508 | 0.50 | 0.50 | 28 | 18.5 | 1600 | 900 | 1.20 | 1.5 | 128 |
| RK2470 | 0.50 | 0.70 | 24 | 9 | 1600 | 650 | 1.23 | 1.90 | 470 |
| RK22903 | 0.50 | 0.90 | 23 | 5.5 | 1600 | 900 | 1.4 | 1.90 | 530 |
| RK27708 | 0.50 | 0.70 | 28 | 8.5 | 1600 | 900 | 1.53 | 2.0 | 306 |
| RK26908 | 0.50 | 0.90 | 26.2 | 6.2 | 1600 | 900 | 1.49 | 2.15 | 380 |
| RK24908 | 0.50 | 0.90 | 24.8 | 7.1 | 1600 | 900 | 1.48 | 2.1 | 460 |
| RK24808 | 0.50 | 0.80 | 24.8 | 8 | 1600 | 900 | 1.4 | 2.0 | 430 |
| RK16903 | 0.70 | 0.90 | 16.3 | 5 | 1600 | 900 | 1.5 | 2.1 | 470 |
| RK16903blue | 0.70 | 0.90 | 16.3 | 5.8/6 | 1600 | 900 | 1.7 | 2.1 | 347/248 |
| RK15905 | 0.90 | 0.90 | 15.3 | 5 | 1600 | 900 | 2.1 | 2.77 | 490 |
| RK151105 | 0.90 | 1.10 | 15.3 | 6.3 | 1600 | 900 | 2.45 | 2.85 | 580 |
| RK12904 | 0.90 | 0.90 | 12.3 | 9.5 | 1600 | 900 | 2.2 | 3.5 | 600 |
