This 3D molding machine is for iron wire with a diameter of 2-8mm
The biggest feature of this machine is that the iron wire rotates
and the head is fixed
Performance characteristics
1. The computer starts and shuts down quickly, and the operation is
simple and convenient. The computer interface can change the
program while adjusting speed while producing.
2. High brand high-speed motor and reducer are used in
configuration, and the production speed is more than 25% higher
than that of similar products in domestic peers.
3. The production can realize that the angle does not change at the
slowest angle, and the production stability is better.
4. Bearings, gears and other important parts are imported brand
accessories, with a 365 day warranty, and the equipment is durable
and reliable.
5. With high precision, it can be used for wire rod forming
products in the range of 2.0-10 mm wire diameter, and the error is
reduced to 0.1 mm
6. The matching use of steel wire butt joint machine makes the wire
change operation of the machine more convenient.
7. It can be connected to the Internet and WiFi through mobile
phone or computer to realize remote control, which makes
after-sales service more convenient.
Technical Parameters
Model | JX3D-6 | JX3D-8 | JX3D-10 |
No. of axis | 380V,7 axis | 380V,7 axis | 380V,7 axis |
Machining wire diameter(MM) | Hard material Φ2.0 ~ Φ4.0 Soft material Φ2.0 ~ Φ6.0 | Hard material Φ3.0 ~ Φ6.0 Soft materialΦ3.0 ~ Φ8.0 | Hard materialΦ3.0 ~ Φ8.0 Soft materialΦ3.0 ~ Φ10.0 |
Number of wire feeding wheels | 3 groups | 3 groups | 3 groups |
Spool servo motor (KW) | 2 | 2.7 | 4.5 |
Head shaft servo motor (KW) | 2 | 2.7 | 4.5 |
Cutter shaft servo motor(KW) | 1 | 1 | 2 |
Lifting shaft servo motor (KW) | 1 | 1 | 2 |
Angle axis servo motor (KW) | 1 | 1 | 1 |
Machine size (MM) | 3800X1860X1660 | 3800X1860X1660 | 3800X1860X1660 |
1. Computer control,
A. adopt speed closed-loop control; The maximum pulse frequency can
reach 2MHz.
B system design integrated motherboard and IO board integrated
design, simple wiring and simple installation.
C system is equipped with windows interface development. The
operation interface is simple and fashionable. Like the operation
mode of ordinary computers, the mouse and keyboard are used
together to replace the traditional key operation, so as to reduce
the risk of key aging and failure.
D. the speed can be modified at any time in the production process,
which is easy to operate.
E simple and repeated programming action and probe make its
production more accurate and stable, and the controller adopts
high-speed probe
F-needle monitoring can respond immediately after 1US the probe is
encountered, which can ensure the consistency of each product.
3D bending product display