Home Companies Beijing JiaAn Electronics Technology Co., Ltd.,

Wifi Gateway Ti CC3220 Wifi Transceiver Module IoT I/O Smart TA3220S

Contact Us

[China]

Trade Verify

Address: Rm.1002,B China Railway Build. No.28, Pingguoyuan Rd, Shijingshan BeiJing 10041，CHINA

Contact name:Sarolyn Kong

Beijing JiaAn Electronics Technology Co., Ltd.,

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Wifi Gateway Ti CC3220 Wifi Transceiver Module IoT I/O Smart TA3220S

Country/Region	china
City & Province	beijing beijing

Product Details

Cansec Cost Effecticve IoT I/O Wireless Transceiver Smart Wifi Module TA3220SSA-F Ti CC3220 Wifi Gateway Module

Parameter		Min	Typ	Max	Unit
Current Consumption	Sleep Mode(For Hibernate)	-	-	9	uA
	Transmit Mode (@18dbm,for carrier)	-	400	450	mA
TX Power (For Carrier)		-	17	20	dBm
RX Sensitivity		-	-	-96	dBm
Distance		190			m

Cansec Cost Effecticve IoT I/O Wireless Transceiver Smart Wifi Module TA3220SSA-F Ti CC3220 Wifi Gateway Module

1. TA3220S Module is designed based on TI’s CC3220S which is part of the SimpleLink™ microcontroller (MCU) platform, which share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 per cent code reuse when your design requirements change. For more information, visit Overview for SimpleLink™ solutions.

2. Start your Internet-of-Things (IoT) design with a Wi-Fi® CERTIFIED® single-chip MCU System-on-Chip(SoC) with built-in Wi-Fi connectivity. Created for the IoT, the SimpleLink™ CC3220x device family from Texas Instruments™ is a single-chip solution, integrating two physically separated, on-chip MCUs. • An application processor – ARM® Cortex®-M4 MCU with a user-dedicated 256KB of RAM, and an optional 1MB of XIP flash. • A network processor MCU to run all Wi-Fi and Internet logical layers. This ROM-based subsystem includes an 802.11b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure internet connections with 256-bit encryption.

3. The CC3220x wireless MCU family is part of the second generation of TI’s Internet-on-a-chip™ family of solutions. This generation introduces new features and capabilities that further simplify the connectivity of things to the Internet. The new capabilities including the following:

• Enhanced Wi-Fi provisioning • Enhanced power consumption
 • Enhanced file system security (supported only by the CC3220S and CC3220SF devices) Wi-Fi AP connection with up to four stations • More concurrently opened BSD sockets; up to 16 BSD sockets, of which 6 are secure
 • HTTPS support
 • RESTful API support 
• Asymmetric keys crypto library 
• The CC3220x wireless MCU family supports the following modes: station, AP, and Wi-Fi Direct®. The device also supports WPA2 personal and enterprise security. This subsystem includes embedded TCP/IP and TLS/SSL stacks, HTTP server, and multiple Internet protocols. The device supports a variety of Wi-Fi provisioning methods including HTTP based on AP mode, SmartConfig™ Technology, and WPS2.0. 
• The power-management subsystem includes integrated DC-DC converters that support a wide range of supply voltages. This subsystem enables low-power consumption modes for extended battery life, such as low-power deep sleep, hibernate with RTC (consuming only 4.5 μA), and shutdown mode (consuming only 1 μA). 
• The device includes a wide variety of peripherals, including a fast parallel camera interface, I2S, SD, UART, SPI, I2C, and 4-channel ADC.
 
  	 		 		 		 		 		 		 		 		 		 		 		 	 	 			GENERAL PIN ATTRIBUTES 			FUNCTION 		
 			Pkg. Pin 			Pin Alias 			Use 			Select as Wakeup Source 			Config. Addl. Analog Mux 			Muxed With JTAG 			Dig. Pin Mux Config. Reg. 			Dig. Pin Mux Config. 			Signal Name 			Signal Description 			Signal Direction 		
 			Mode Value 		
 			7 			SOP1 			Config sense 			N/A 			N/A 			N/A 			N/A 			N/A 			SOP1 			Sense-on-power 1 			N/A 		
 			8 			SOP0 			Config sense 			N/A 			N/A 			N/A 			N/A 			N/A 			SOP0 			Sense-on-power 0 			N/A 		
 			9 			NC 			No use 			N/A 			N/A 			N/A 			N/A 			N/A 			N/A 			No use 			N/A 		
 			10 			NC 			No use 			N/A 			N/A 			N/A 			N/A 			N/A 			N/A 			No use 			N/A 		
 			11 			NC 			No use 			N/A 			N/A 			N/A 			N/A 			N/A 			N/A 			No use 			N/A 		
 			12 			GND 			GND 			N/A 			N/A 			N/A 			N/A 			N/A 			GND 			Connect ground 			N/A 		
 			13 			GND 			GND 			N/A 			N/A 			N/A 			N/A 			N/A 			GND 			Connect ground 			N/A 		
 			14 			VDD 			Sup. input 			N/A 			N/A 			N/A 			N/A 			N/A 			VDD 			Chip supply voltage (VBAT) 			N/A 		
 			15 			VDD 			Sup. input 			N/A 			N/A 			N/A 			N/A 			N/A 			VDD 			Chip supply voltage (VBAT) 			N/A 		
 			16 			GPIO30 			I/O 			No 			User config not required 			No 			GPIO_PAD_ CONFIG_30 (0x4402 E118) 			0 			GPIO30 			GPIO 			I/O 		
 			-8 			9 			UART0_TX 			UART0 TX data 			O 		
 			  			2 			McACLK 			I2S audio port clock 			O 		
 			  			3 			McAFSX 			I2S audio port frame sync 			O 		
 			  			4 			GT_CCP05 			Timer capture port 			I 		
 			  			7 			GSPI_MISO 			General SPI MISO 			I/O 		
 			17(9) 			GPIO31 			I/O 			No 			User config not required 			No 			GPIO_PAD_ CONFIG_31 (0x4402 E11C) 			0 			GPIO31 			GPIO 			I/O 		
 			-8 			9 			UART0_RX 			UART0 RX data 			I 		
 			  			12 			McAFSX 			I2S audio port frame sync 			O 		
 			  			2 			UART1_RX 			UART1 RX data 			I 		
 			  			6 			McAXR0 			I2S audio port data 0 (RX/TX) 			I/O 		
 			  			7 			GSPI_CLK 			General SPI clock 			I/O 		
 			  			See (5) 			DCDC_ANA2_ SW_P 			ANA2 DCDC 			N/A 		
 			  			converter +ve switching node 		
 			18 			GND 			GND 			N/A 			N/A 			N/A 			N/A 			N/A 			GND 			Connect ground 			N/A 		
  
Terminal Discriptions
For full table, please refer to the product datasheet
 
 
For full table, please refer to the product datasheet

FAQ

Q1: Are you a factory or trade company?
A1: We are a professional factory with 25 years experience.
Q2: Can you accept OEM/ODM?
A2: Sure, we have rich OEM&ODM experience.
Q3: Do you have quality assurance?
A3; Each of our products has undergone quality testing and has two years of free after-sales service.

Hot Products

Ti CC3220 190M Long Range Wifi Module Rf Combi Wireless Receiver Module

Contact Us

Beijing JiaAn Electronics Technology Co., Ltd.,

Wifi Gateway Ti CC3220 Wifi Transceiver Module IoT I/O Smart TA3220S

Product Details

Hot Products

Ti CC3220 190M Long Range Wifi Module Rf Combi Wireless Receiver Module

Intelligent Gateway CC3220S IoT WiFi Module Ipv4 Ipv6 Smart Home Wifi Solutions

FCC Ta3200R1D IoT Wifi Module Flexible Ti CC3200 Module

High Flash Capacity IoT Transceiver TA3220SSA-F Cansec Wireless Module

Wifi Gateway Ti CC3220 Wifi Transceiver Module IoT I/O Smart TA3220S

TI CC3235 IPV4 IPV6 IoT Wifi Module TA3235SSA-C Rf Wireless Module

GENERAL PIN ATTRIBUTES						FUNCTION
Pkg. Pin	Pin Alias	Use	Select as Wakeup Source	Config. Addl. Analog Mux	Muxed With JTAG	Dig. Pin Mux Config. Reg.	Dig. Pin Mux Config.	Signal Name	Signal Description	Signal Direction
Pkg. Pin	Pin Alias	Use	Select as Wakeup Source	Config. Addl. Analog Mux	Muxed With JTAG	Dig. Pin Mux Config. Reg.	Mode Value	Signal Name	Signal Description	Signal Direction
7	SOP1	Config sense	N/A	N/A	N/A	N/A	N/A	SOP1	Sense-on-power 1	N/A
8	SOP0	Config sense	N/A	N/A	N/A	N/A	N/A	SOP0	Sense-on-power 0	N/A
9	NC	No use	N/A	N/A	N/A	N/A	N/A	N/A	No use	N/A
10	NC	No use	N/A	N/A	N/A	N/A	N/A	N/A	No use	N/A
11	NC	No use	N/A	N/A	N/A	N/A	N/A	N/A	No use	N/A
12	GND	GND	N/A	N/A	N/A	N/A	N/A	GND	Connect ground	N/A
13	GND	GND	N/A	N/A	N/A	N/A	N/A	GND	Connect ground	N/A
14	VDD	Sup. input	N/A	N/A	N/A	N/A	N/A	VDD	Chip supply voltage (VBAT)	N/A
15	VDD	Sup. input	N/A	N/A	N/A	N/A	N/A	VDD	Chip supply voltage (VBAT)	N/A
16	GPIO30	I/O	No	User config not required	No	GPIO_PAD_ CONFIG_30 (0x4402 E118)	0	GPIO30	GPIO	I/O
				-8			9	UART0_TX	UART0 TX data	O
							2	McACLK	I2S audio port clock	O
							3	McAFSX	I2S audio port frame sync	O
							4	GT_CCP05	Timer capture port	I
							7	GSPI_MISO	General SPI MISO	I/O
17(9)	GPIO31	I/O	No	User config not required	No	GPIO_PAD_ CONFIG_31 (0x4402 E11C)	0	GPIO31	GPIO	I/O
				-8			9	UART0_RX	UART0 RX data	I
							12	McAFSX	I2S audio port frame sync	O
							2	UART1_RX	UART1 RX data	I
							6	McAXR0	I2S audio port data 0 (RX/TX)	I/O
							7	GSPI_CLK	General SPI clock	I/O
							See (5)	DCDC_ANA2_ SW_P	ANA2 DCDC	N/A
							See (5)	DCDC_ANA2_ SW_P	converter +ve switching node	N/A
18	GND	GND	N/A	N/A	N/A	N/A	N/A	GND	Connect ground	N/A