15t Railway Vehicle Bogie Lift 2000mm Stroke For Inspection
Railway Vehicle Bogie Lift For Bogie Inspection And
Maintenance , Railway Depot Equipment
Application scope:
This Bogie lift is mainly used for the inspection of bogies of
different types of railway coaches and trailors, that is, first
push the bogie onto the track of bogie lift, and then control the
lift to rise to a suitable height for bogie inpeciton and
maintenance. After inspection completed, lower the lift to the same
level as the shop track, and then push the bogie out of the bogie
lift.
Main Technical Parameters:
Maximum lifting capacity | 15 tons |
Lifting stroke | 2000 mm |
Lifting speed | Approx.1000 mm/min (adjustable) |
Synchronous lifting error of the 4 columns | 0 mm |
Track gauge | 1435 mm |
Maximum wheelbase | 2800 mm |
Total installed power | Not more than 30kW |
Power supply | 380V/50Hz, AC 3 phase |
Noise level during work | Not more than 70 dB |
Ambient temperature | 0℃ ~ 40℃ |
Relative humidity | Not more than 95% |
(*The detail parameters can be modified as per customer's actual
requirements.)
MAIN FEATURES:
- The bogie lift is suitable for the lifting inspection of
railway bogie with dimension 4500x3500x1100 mm.
- The bogie lift is mainly composed of fixed bracket, lifting
columns, initial positioning device, lifting drive device, bogie
supports, anti-slip cover, automatic lubrication system, drainage
system and electrical control system etc.
- The bogie lift adopts motor screws to drive an support the
synchronous lifting of the bogie.
- The 4 lifting columns combined together to a rigid structure which
ensure the 0 error of the synchronous lifting error. The
lifting columns are guided by 4 heavy-load linear guides.
- The operation of the bogie lift is controled on the control console
which is eary to learn and very convenient.
- It's equipped with automatic and manual control modes, with fault
diognosis and error display functions.
- The bogie lift has sufficient strength and rigidity, and equipped
with reliable safety protection devices.
- The bogie lift is of overall steel structure design. It applies
finite element technology to analyze the deformation of the
structure under various stress conditions, and optimize the design
to make the overall structure reasonable, safe and reliable
with good rigidity.
- The bogie lift is a new equipment (including all parts, components
and accessories), and manufactured with new high-quality materials.
The mechanical components used is a series of advanced, high
quality, reliable and practical products, and conforms with
relevant international standards.
- Metal components of equipment and instruments are rustproof and
painted except machining surface and electroplating surface.
- All devices and meters are measured in accordance with the
international system of units (SI) standards. The design,
manufacture and tests of the equipment and meters conform to
international industrial standards (ISO) and International
Electrotechnical standards (IEC). The protection grade of all
electrical components is not less than IP54.
Technical Documents:
The following technical documents will be supplied along with the
bogie lift when delivery in hard copy and soft copy in English
language (provide E-copy to the buyer before delivery):
- Operating and maintenance instruction manual;
- General arrangement drawing, Electrical schematic diagram;
- Foundation drawing;
- Spare part list, Special tool list;
- Product certificate / Factory Acceptance Certificate, etc
![](http://img.everychina.com/nimg/4a/14/b061dc9c06fdfd9b6fc57d82c721.jpg)