1/2" Square Welded Wire Mesh Machine 415V Chicken Mesh Making Machine

GI Wire Brickforce Mesh Used In Building Welded Wire Mesh Machine

Welded Wire Mesh Machine Description

The welded wire mesh machine is full automatic.The warp wire and the weft wire is feeding by wire coils.Put the wire coils on the wire racks ensure the smooth material feeding of the machine.Set the length of the mesh roll you need on the counter of the control panel in advance.The machine will stop automatically.Then the worker cut the mesh with electric scissors and unloaded the mesh roll from the machine.

 Welded Wire Mesh Machine Technology

1. The welded wire mesh machine adopts the integrated circuit board to control the SCR module, adjust the welding current and welding time, the welding is more firm and the welding effect is better.

2. The two ends of two wire coils can be welded by butt welding machine, so that the mesh roll is more beautiful.

3. The welded wire mesh machine adopts separate times welding,reduced the load of the power source, making energy efficient.

4. The wire drawing shaft of the machine is made of heat-treated 45 steel, which is very wear-resistant. This accessory does not need to be replaced.

5. The machine belong to resistance welding machine.All cross welds on the weft are welded at the same time.

Welded Wire Mesh Machine Welding Electrode

The welding electrode belongs to wearing parts.It is made of high quality high chromium copper,can be used for more than 2 years.Compared with the ordinary brass bar, our high-quality welding electrode have long service life and good welding effect. The production cost is reduced.