Road Construction Material 3mm 50x50mm Wire Mesh Welder

Road Construction 3-6mm Roll Mesh Welding Machine Construction Material

Roll Mesh Welding Machine Description

Roll mesh welding machine belongs to a high degree of automation machine.The warp wire is feeding by coil wire.The weft wire is pre straightening and cutting.The machine belongs to resistance welding machine, all welding points are welded at one time.The welding is full automatic.The aperture is adjustable.the100x100mm,150x150mm aperture mesh panel is mostly used as building material.The length of the panel can be set in the control system.2m length,3m,4m,5m or 6m is all ok for the machine.

Roll Mesh Welding Machine Advantage

1. The warp wire is feeding by coil wires.The machine can continuously weld a large number of meshes without frequently adding warp wire.

2. The automatic cutting machine can cut the mesh to panels.The blade quality of the cutting machine is very good, it can be used for about 4 years.

3. The welding current and welding speed can be adjusted in the control cabinet.

4. The width of the mesh is also adjustable.The mesh smaller than the customized width can be welded.

5. Machines do not weld only one diameter. It can weld a certain range of wire diameter.

Panel Mesh Welding Machine Parameter

Main Welding Machine with control system

Control system: The visual touch screen is just like a computer.Easy to operate.

Mesh Pulling System: It is controlled by servo motor and air cylinders.It can pull the mesh in smooth speed.

Automatic Mesh Cutting Machine:This device can cut the mesh to panels in different length.

Finish Mesh