Active Member
|
[China]
Address: Middle,South of Wire Mesh Industrial Zone,Anping County,Hebei Province,China.
Contact name:Cathy Tong
Anping Tianke wire mesh equipment Co., Ltd |
|
|
Green Colour Chain Link Roll Mesh Diamond Fence Mesh Weave Machine
Diamond Fence Mesh Weave Machine Description
The operation is simple, the mold cost is low, and the production efficiency is high. One person can operate two machines at the same time or two persons can operate three to five machines at the same time. The production specifications are varied, the degree of automation is high, save time and effort, the mesh quality is good, and the electromechanical integration. The pneumatic method used simplifies the mechanical transmission structure. The failure point is reduced, the failure rate is greatly reduced, and the pneumatic components are relatively cheap, the maintenance cost is low, the maintenance is convenient, and simple and convenient.
Diamond Fence Mesh Weave Machine Advantage
Chain link fence machine also called diamond wire mesh machine.The equipment is reasonable design with double wire or single wire weaving,automatic edging,curving and mesh rolling.It is easy to operate with human machine interface based on PLC control. The machine use the most advance technology,so the output is very high.And you can get different specification of chain link mesh by changing the mould.The chain link mesh is uniform,beautiful and practical,it is sold well in the foreign countries.
Application
1. Widely used in breeding chickens, ducks, geese, rabbits and zoo
fence.
2. In the handicraft manufacturing,mechanical equipment
transmission network.
3. Machinery and equipment protection,highway guardrail,sports
venues fence, the road green belts fence.
4. The superior material is flood control and flood fighting.
5. The screen to make into a container of a box shape,fill the
cages with rocky and so on, also can be used to protect and support
seawall, slope, road and bridge, reservoirs and other civil
engineering fields.
Chain Link Fence Machine Parameter
| Power configuration | 6 sets of 0.75kw three-phase motors, 1 set of 1.5kw three-phase motors = 6.0kw |
| Adapt to a wide range of materials | High carbon steel wire 1800 hPa Galvanized wire Modified wire PVC coated wire |
| Production range classification | Wire diameter 1.0mm-5.0mm Aperture 10mm-30m (special) 30mm-100mm (standard) 100mmm-150mm (special) Mesh according to mold |
| Length * Width * Height (work occupation area) | 2 meters wide and 4.5 meters wide (increasing or decreasing
according to the width) * 2.2m * 1.3m 3m width 5.5m (according to width increase / decrease) * 2.2m * 1.3m 4 meters width 6.5 meters (according to the width increase and decrease) * 2.2m * 1.3m 5 meters width 7.5 meters (according to the width increase and decrease) * 2.2m * 1.3m 6 meters width 8.5 meters (according to the width increase and decrease) * 2.2m * 1.3m |
| Actual packing volume (length * width * height) | 2 meters wide and 4.5 meters wide (increasing or decreasing
according to the width) * 2.2m * 1.3m 3m width 5.5m (according to width increase / decrease) * 2.2m * 1.3m 4 meters width 6.5 meters (according to the width increase and decrease) * 2.2m * 1.3m 5 meters width 7.5 meters (according to the width increase and decrease) * 2.2m * 1.3m 6 meters width 8.5 meters (according to the width increase and decrease) * 2.2m * 1.3m |
| weight | About 1.8T-2.0T |
| Rotating speed | Adjustable frequency conversion |
FAQ
Q: Are you a manufacturer?
