Shijiazhuang Renchun Mesh Equipment Co.,Ltd. |
|
Export Wedge Stainless Steel Wire Screen Welding Machine With High Quality
1) Two working methods: manual and auto. Under Auto method, by
inputting relative data, the machine will work automatically.
2) Very strong self-diagnose function, can display any
mis-operation alarms; Alarming error can be seen from displayer.
3) The Wedge Wire Screen Welding Machine featured by low noise, low
energy consumption, steady function and safety, ect.
Stainless stee wire screen welding machine significant parameters
Product name | Stainless Steel Wire Wrapped Screen Cylinder Water Treatment Welding Machine With Mitsubishi System | Filter tube diameter | 100mm-650mm |
Rod and wire diameter | 1.2mm-5mm | Filter tube Max length | 6000mm |
Material | stainless steel;carbon steel | Mitsubishi double drive servo motor | 7kw two sets;5.5 one set |
Welding transformer power | 200 KVA | Welding speed | 6-30 rpm |
Slot (ajustable) | 0.05mm-20mm | Slot precision | ±0.03mm |
Application | water well screen manufacturing | Model number | HWJ600 |
Origin | Hebei ,China | Sea port | Tianjin |
Easy Clearing
The narrowest part of the aperture comes at the top and the steady
opening out from that point promotes easy clearing.
Lateral Strength
Increases rapidly with the width of the profile and sufficient is
needed to avoid the likelihood of the Wedge Wires being bent
sideways and the accuracy of the slot being thereby lost.
Load Carrying Capacity or Vertical Strength
Increases rapidly with the depth of the profile and is needed to a
greater degree than is lateral strength
Percentage Open Area
For any given aperture size this depends on the number of apertures
per foot width of Johnson screen. The wider the profile the fewer
the apertures, and the less is open area - likewise the smaller the
number of pressed Wedge Wires per foot, the greater the open area.
Wearing Life
With abrasive materials the top surface of the profile becomes worn
away and inevitably the aperture must increase. With a small angle
of opening the increase is gradual, but with a large angle it is
rapid. The apertures quickly reach the oversize limit and the
working life is reduced.