|
[China]
Trade Verify
Address: SOUTH OF XING’AN ROAD(NORTH OF XUTUAN VILLAGE), ANPING COUNTY, HEBEI PROVINCE, CHINA
Contact name:Orange Song
Anping County Hengyuan Hardware Netting Industry Product Co.,Ltd. |
|
Verified Suppliers
|
|
|
8-5/8" Diameter Stainless Steel Wire Screen Pipe With Welded Rings Ends
Specificarion:
| Material | Stainless steel |
| Grade | 304, Also can be 205, 321, 316L etc. |
| O.D | 219mm, Also can be 89mm 117mm 168mm 273mm 325mm 377mm 426mm etc |
| Size | 8-5/8", Also can be 2-1/2", 3-1/2", 4-1/2", 5-1/2", 6-5/8", 10-3/4", 12-3/4", 14", 16" |
| Length | 5.8 m / 2.9 m in usual, to fit container (upto 6 meters ) |
| Solt size | 1.0 mm, Also be can 0.5mm, 0.63mm, 0.75mm, 1.5mm etc. |
| End connection | Welded rings, Also can be Male/female threaded couplngs; Flange and so on. |
| Wire size | 2*3.5mm, 2.2*3.5mm, 3.0*4.6mm, 3*5mm, 3.2*6mm, etc. |
| Support rod | ø2.5-6.0mm round wire , Also can be Vee shaped wire |
| Wire shape | Vee-shaped wire |
1. Wire Screen with high open area are more suitable for the construction of high-quality water wells, oil wells and gas wells.
2. Low cost operation Screens with high open area shall favor
groundwater infiltration.
Abundant water shall reduce the water level’s down, thus to save energy consumption.
3. Reduce the abrasion of the pump
Under the same condition, high open area can make the speed
of groundwater’s entering into the screen much slower than any
other filtration apparatus, which will avoid
sand’s entering into screen because of high pressure, thus reduce
the abrasion of the pump.
4. Extend the life span of wells
Comparatively, groundwater’s entering into screen with higher open
area is much easier than the entering into lower open area screen.
The slow water flow shall extend the life span of wells.
Regular Specification:
SIZE (INCH) | O.D (MM) | SLOT (MM) | LENGTH (M) | COLLAPSE STRENGTH (BAR) | TENSILE WEIGHT (TON) | WRAP WIRE(WIDTH*HEIGHT) (MM) | RODS (MM) |
| 3-1/2 | 88.9 | 1.0 | 3 | ＞22 | 10.2 | 2.3*3.5 | 3.8MM/22 |
| 4-1/2 | 114.3 | 1.0 | 3 | ＞28 | 11.5 | 2.3*3.5 | 3.8MM/22 |
| 6-5/8 | 168.3 | 0.75 | 5.8 | ＞40 | 12.8 | 2.3*3.5 | 3.8MM/32 |
| 6-5/8 | 168.3 | 1.0 | 5.8 | ＞33 | 12.8 | 2.3*3.5 | 3.8MM/32 |
| 6-5/8 | 168.3 | 0.63 | 5.8 | ＞83 | 45 | 3.2*6.0 | 6.0MM*32 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | ＞34 | 21.9 | 2.3*3.5 | 3.8MM/48 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | ＞50 | 38.2 | 3.0*5.0 | 4.0MM/48 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | ＞60 | 46 | 3.2*6.0 | 5.0MM/48 |
| 10-3/4 | 273.1 | 0.75 | 5.8 | ＞50 | 32.9 | 2.3*3.5 | 4.9MM/55 |
| 10-3/4 | 273.1 | 1.0 | 5.8 | ＞60 | 39.5 | 3.0*5.0 | 4.9MM/55 |
| 10-3/4 | 273.1 | 1.0 | 5.8 | ＞100 | 48 | 3.2*6.0 | 5.0MM/55 |
| 12-3/4 | 323.9 | 1.0 | 5.8 | ＞120 | 37.2 | 3.0*5.0 | 4.0MM/50 |
| 14 | 355.6 | 1.0 | 3 | ＞80 | 37.8 | 3.0*5.0 | 4.0MM/59 |
Use:
water well
water supply systems
Refining & petrochemical
Filter equipment
Sand control
