Home Companies Yuyao No. 4 Instrument Factory

Mini Water Solenoid Valve

Contact Us

[China]

Trade Verify

Address: No.66 Changxin Road, Yuyao City, Zhejiang Province, China

Contact name:Ying Liu

Yuyao No. 4 Instrument Factory

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Mini Water Solenoid Valve

Country/Region	china
City & Province	zhejiang
Categories	Valves

Product Details

2W series 2-way direct acting ( NC ) solenoid valve 1/8＂～ 3/8＂

working medium:water,liquid,air,light oil(viscosity≤20cst)

medium temperature:-5 ～ 80℃

working pressure:0 ～ 15bar (details see specification table)

working type:direct acting(NC)

valvebody material:brass SS316

sealing material:NBR

interface:G thread NPT thread

working voltage:AC220～240V AC110V 50/60Hz 22VA DC24V DC12V 13W IP65 H degree

options:

Rc thread sealing material: EPDM VITON VMQ

digital timer LED light connector ES low power energy saving coil(AC220V 3VA DC24V 3W)

2W-series 2-way direct acting(NC)specification table

(ES coil can match EPDM and VITON, but medium temperature must be ≤80℃)

Interface size	Orifice size (mm)	Cv	working pressure(bar)			medium temperature ℃	sealing material	coil insulation degree	coil power				normal order code
			min pressure	max pressure pressure					Normal coil		Es coil		plastic seal voltage AC220V G thread sealing material:Blank: NBR E:EPDM V:VITON
				air gas water hotwater liquid light oil					VA	W	VA	W
				air gas water hotwater liquid light oil					AC 220 V	DC 24 V	AC 220 V	DC 24 V
				AC	DC				AC 220 V	DC 24 V	AC 220 V	DC 24 V	brass	SS316
1/8^〃	2.5	0.2	0	15	15	80	NBR	H	22	13	3	3	2W-025-06N-AC220V	2W-025-06JN-AC220V
	2.5	0.2	0	15	15	130	EPDM	H	22	13			2W-025-06N-E-AC220V	2W-025-06JN-E-AC220V
	2.5	0.2	0	15	15	120	VITON	H	22	13			2W-025-06N-V-AC220V	2W-025-06JN-V-AC220V
	3.0	0.25	0	12	12	80	NBR	H	22	13	3	3	2W-030-06N-AC220V	2W-030-06JN-AC220V
	3.0	0.25	0	12	12	130	EPDM	H	22	13			2W-030-06N-E-AC220V	2W-030-06JN-E-AC220V
	3.0	0.25	0	12	12	120	VITON	H	22	13			2W-030-06N-V-AC220V	2W-030-06JN-V-AC220V
	4.0	0.3	0	8	5	80	NBR	H	22	13	3	3	2W-040-06N-AC220V	2W-040-06JN-AC220V
	4.0	0.3	0	8	5	130	EPDM	H	22	13			2W-040-06N-E-AC220V	2W-040-06JN-E-AC220V
	4.0	0.3	0	8	5	120	VITON	H	22	13			2W-040-06N-V-AC220V	2W-040-06JN-V-AC220V
1/4^〃	2.5	0.2	0	15	15	80	NBR	H	22	13	3	3	2W-025-08N-AC220V	2W-025-08JN-AC220V
	2.5	0.2	0	15	15	130	EPDM	H	22	13			2W-025-08N-E-AC220V	2W-025-08JN-E-AC220V
	2.5	0.2	0	15	15	120	VITON	H	22	13			2W-025-08N-V-AC220V	2W-025-08JN-V-AC220V
	3.0	0.25	0	12	12	80	NBR	H	22	13	3	3	2W-030-08N-AC220V	2W-030-08JN-AC220V
	3.0	0.25	0	12	12	130	EPDM	H	22	13			2W-030-08N-E-AC220V	2W-030-08JN-E-AC220V
	3.0	0.25	0	12	12	120	VITON	H	22	13			2W-030-08N-V-AC220V	2W-030-08JN-V-AC220V
	4.0	0.3	0	8	5	80	NBR	H	22	13	3	3	2W-040-08N-AC220V	2W-040-08JN-AC220V
	4.0	0.3	0	8	5	130	EPDM	H	22	13			2W-040-08N-E-AC220V	2W-040-08JN-E-AC220V
	4.0	0.3	0	8	5	120	VITON	H	22	13			2W-040-08N-V-AC220V	2W-040-08JN-V-AC220V
1/4^〃	5.0	0.4	0	5	3	80	NBR	H	22	13	3	3	2W-050-08N-AC220V	2W-050-08JN-AC220V
	5.0	0.4	0	5	3	130	EPDM	H	22	13			2W-050-08N-E-AC220V	2W-050-08JN-E-AC220V
	5.0	0.4	0	5	3	120	VITON	H	22	13			2W-050-08N-V-AC220V	2W-050-08JN-V-AC220V
	6.0	0.7	0	4	3	80	NBR	H	22	13	3	3	2W-060-08N-AC220V	2W-060-08JN-AC220V
	6.0	0.7	0	4	3	130	EPDM	H	22	13			2W-060-08N-E-AC220V	2W-060-08JN-E-AC220V
	6.0	0.7	0	4	3	120	VITON	H	22	13			2W-060-08N-V-AC220V	2W-060-08JN-V-AC220V
3/8^〃	4.0	0.3	0	8	5	80	NBR	H	22	13	3	3	2W-040-10N-AC220V	2W-040-10JN-AC220V
	4.0	0.3	0	8	5	130	EPDM	H	22	13			2W-040-10N-E-AC220V	2W-040-10JN-E-AC220V
	4.0	0.3	0	8	5	120	VITON	H	22	13			2W-040-10N-V-AC220V	2W-040-10JN-V-AC220V

Water solenoid valve use and maintenance:
1, it is recommended to use the unit to send the person responsible for maintenance.
2, the solenoid valve is installed into the media need to pass several experimental action shall be put into use after confirming normal.
3, large internal and external valve should be cleaned regularly and the title of the pull side of the dirt, careful not to damage the sealing surface.
4, when the solenoid valve is a long time to do, should be closed before the valve manual valve, when re-enabled, steam solenoid valve should condensate removal and clean, and make trial action several times, only to be put into use after the switch to normal.
5, when the solenoid valve from the pipeline do not remove, the internal parts should be scrubbed and blowing with compressed air storage.
6, when used for a long time, such as a seal between the piston and the valve seat is bad, the piston sealing surface re-polished, and now seat grinding.
7, in operation, should pay attention to before and after the valve pressure gauge required working pressure must not exceed the rated pressure, working pressure must be within the rated pressure range. When the operating pressure exceeds the rated pressure or working pressure exceeds the rated pressure, the solenoid valve to stop using closed before and after manual valves, solenoid valves to prevent explosions and leaks.