Home Companies Yuyao No. 4 Instrument Factory

2W Series 1/8” Water Solenoid Valve 24V Automotive Electrically Operated Water Valve

Contact Us

[China]

Trade Verify

Address: No.66 Changxin Road, Yuyao City, Zhejiang Province, China

Contact name:Ying Liu

Yuyao No. 4 Instrument Factory

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

2W Series 1/8” Water Solenoid Valve 24V Automotive Electrically Operated Water Valve

Country/Region	china
City & Province	zhejiang
Categories	Valves

Product Details

2W series 2-way direct acting normally open water air solenoid valve 1/8＂～ 3/8＂

Options:

Rc thread, sealing material: EPDM VITON VMQ (-10 ～ 130℃)

digital timer, LED light connector

Es low power energy saving coil ( DN≤4mm 1/8＂ 1/4＂ AC 220V 4VA DC24V 4W

DN≥4mm 3/8＂ AC 220V 5VA DC24V 6W)

2W-series direct acting(NO)solenoid valve specification table

(ES coil can match EPDM and VITON, but medium temperature must be ≤80℃)

interface	orifice (mm)	Cv	working pressure(bar)			medium temp. ℃	sealing material	coil insulation degree	coil power				normal order code
			min pressure	max pressure					Normal coil codecoil		Es coil		plastic seal Voltage AC220V Thread:G thread sealing material:blank:NBR E:EPDM V:VITON
				air gas water hotwater liquid light oil					VA	W	VA	W
				air gas water hotwater liquid light oil					AC 220 V	DC 24 V	AC 220 V	DC 24 V
				AC	DC				AC 220 V	DC 24 V	AC 220 V	DC 24 V	brass	SS316
1/8^〃	1.5	0.06	0	16	16	80	NBR	H	22	13	4	4	2W-015-06NK-AC220V	2W-015-06JNK-AC220V
	1.5	0.06	0	16	16	130	EPDM	H	22	13			2W-015-06NK-E-AC220V	2W-015-06JNK-E-AC220V
	1.5	0.06	0	16	16	120	VITON	H	22	13			2W-015-06NK-V-AC220V	2W-015-06JNK-V-AC220V
	2.0	0.1	0	10	10	80	NBR	H	22	13	4	4	2W-020-06NK-AC220	2W-020-06JNK-AC220
	2.0	0.1	0	10	10	130	EPDM	H	22	13			2W-020-06NK-E-AC220	2W-020-06JNK-E-AC220
	2.0	0.1	0	10	10	120	VITON	H	22	13			2W-020-06NK-V-AC220	2W-020-06JNK-V-AC220
	2.5	0.2	0	6	6	80	NBR	H	22	13	4	4	2W-025-06NK-AC220	2W-025-06JNK-AC220
	2.5	0.2	0	6	6	130	EPDM	H	22	13			2W-025-06NK-E-AC220	2W-025-06JNK-E-AC220
	2.5	0.2	0	6	6	120	VITON	H	22	13			2W-025-06NK-V-AC220	2W-025-06JNK-V-AC220
	3.0	0.25	0	5	5	80	NBR	H	22	13	4	4	2W-030-06NK-AC220	2W-030-06JNK-AC220
	3.0	0.25	0	5	5	130	EPDM	H	22	13			2W-030-06NK-E-AC220	2W-030-06JNK-E-AC220
	3.0	0.25	0	5	5	120	VITON	H	22	13			2W-030-06NK-V-AC220	2W-030-06JNK-V-AC220
	4.0	0.3	0	3	3	80	NBR	H	22	13	4	4	2W-040-06NK-AC220	2W-040-06JNK-AC220
	4.0	0.3	0	3	3	130	EPDM	H	22	13			2W-040-06NK-E-AC220	2W-040-06JNK-E-AC220
	4.0	0.3	0	3	3	120	VITON	H	22	13			2W-040-06NK-V-AC220	2W-040-06JNK-V-AC220
1/4^〃	1.5	0.06	0	16	16	80	NBR	H	22	13	4	4	2W-015-08NK-AC220V	2W-015-08JNK-AC220V
	1.5	0.06	0	16	16	130	EPDM	H	22	13			2W-015-08NK-E-AC220V	2W-015-08JNK-E-AC220V
	1.5	0.06	0	16	16	120	VITON	H	22	13			2W-015-08NK-V-AC220V	2W-015-08JNK-V-AC220V
	2.0	0.1	0	10	10	80	NBR	H	22	13	4	4	2W-020-08NK-AC220	2W-020-08JNK-AC220
	2.0	0.1	0	10	10	130	EPDM	H	22	13			2W-020-08NK-E-AC220	2W-020-08JNK-E-AC220
	2.0	0.1	0	10	10	120	VITON	H	22	13			2W-020-08NK-V-AC220	2W-020-08JNK-V-AC220
	2.5	0.2	0	6	6	80	NBR	H	22	13	4	4	2W-025-08NK -AC220	2W-025-08JNK -AC220
	2.5	0.2	0	6	6	130	EPDM	H	22	13			2W-025-08NK-E-AC220	2W-025-08JNK-E-AC220
	2.5	0.2	0	6	6	120	VITON	H	22	13			2W-025-08NK-V-AC220	2W-025-08JNK-V-AC220
	3.0	0.25	0	5	5	80	NBR	H	22	13	4	4	2W-030-08NK-AC220	2W-030-08JNK-AC220
	3.0	0.25	0	5	5	130	EPDM	H	22	13			2W-030-08NK-E-AC220	2W-030-08JNK-E-AC220
	3.0	0.25	0	5	5	120	VITON	H	22	13			2W-030-08NK-V-AC220	2W-030-08JNK-V-AC220
	4.0	0.3	0	3	3	80	NBR	H	22	13	4	4	2W-040-08NK-AC220	2W-040-08JNK-AC220
	4.0	0.3	0	3	3	130	EPDM	H	22	13			2W-040-08NK-E-AC220	2W-040-08JNK-E-AC220
	4.0	0.3	0	3	3	120	VITON	H	22	13			2W-040-08NK-V-AC220	2W-040-08JNK-V-AC220
3/8^〃	4.0	0.3	0	4	4	80	NBR	H	20	20	5	6	2W-040-10NK-AC220	2W-040-10JNK-AC220
	4.0	0.3	0	4	4	130	EPDM	H	20	20			2W-040-10NK-E-AC220	2W-040-10JNK-E-AC220
	4.0	0.3	0	4	4	120	VITON	H	20	20			2W-040-10NK-V-AC220	2W-040-10JNK-V-AC220

Water solenoid valve installation instructions:
1, the installation of the solenoid valve coil up and maintain the vertical position, the solenoid valve arrow or mark shall be consistent with the flow of the pipeline can not be installed in a splash of water or the leak.
2, the working medium of the solenoid valve should be clean and free of particulate impurities, dirt and member of the electromagnetic valve on the filter surface, requiring regular clean.
3, when the solenoid valve fails to timely isolation solenoid valves, and ensure the normal operation, it is best to install a bypass device.
4, in the pipeline system, installed in the branch on the way solenoid valve diameter should be less than the main pipe valve diameter.
5, before installing solenoid valves, pipes must be cleaned. It recommended before valve mounting filters, steam trap piping installation.
6, the valve can not be installed in the lower recesses of the pipe, so as to avoid steam condensate and impurities precipitated and hinder valve operation.
7, it can not be used in explosion hazardous areas.
8, in the lack of rigid pipe, it is recommended to use the valve before the pipe bracket, so as not to cause vibrations when the solenoid valve is working.
9, prior to installation, pay attention to see the product label, carefully read the instruction manual to determine whether the product meets the conditions of use.
10, before and after the valve pressure gauge to be installed on the pipe, in order to observe the pipeline pressure

Founded in 1965, Yuyao No.4 Instrument Factory has been a professional manufacturer of solenoid valves and has enjoyed an excellent reputation through the past more than 50 years in China.

The company is equipped with superior production machines, advanced process flows, complete testing systems; the products have sophisticated structure, reliable performance, fine outlook and reasonable price, covering over 40 series and 3000 specifications, having been exported to all over the whole world since 2004.