1/4＂Normally Closed Steam Solenoid Valve , Brass Flange Electronic Solenoid Valve

RSPS series zero pressure differential normally steam hot water solenoid valve 1/4＂ ～ 2＂
 
 
working medium:steam, high temperature liquid
medium temperature:0 ～ 180 ℃
working pressure:0 ～ 16bar(details see specification table)
working type:semi direct acting(NC)
valve body material:brass SS304
sealing material:PTFE
interface:G thread NPT thread
Working voltage:AC220～240V AC110V 50/60Hz DC24/12V IP65 H degree
AC power: DN8～20 23VA DN25 26VA DN35～50 32VA DC power: DN8～20 28W DN25～50 30W
 
RSPS-series steam solenoid valve(NC)specification table

 

 
 
 

 

 
 
Steam solenoid valve installation
 
1, in the lack of rigid pipe, it is recommended to use the valve before the pipe bracket, so as not to cause vibrations when the solenoid valve is working.
2, the working medium steam solenoid valve should be clean and free of particulate impurities, dirt and member of the electromagnetic valve on the filter surface, requiring regular clean.
3, when the steam solenoid valve fails to timely isolation solenoid valves, and ensure the normal operation, it is best to install a bypass device.
4, in the pipeline system, installed in the branch on the way solenoid valve diameter should be less than the main pipe valve diameter (Figure 2).
5, install the solenoid valve coil up and maintain the vertical position, the solenoid valve arrow or mark shall be consistent with the flow of the pipeline can not be installed in a splash of water or the leak.
6, steam solenoid valve can not be installed in the lower recesses of the pipe, so as to avoid steam condensate and impurities precipitated valve impede action.
7, ordinary type can not be used in explosion hazardous areas.
8, before the installation of the steam solenoid valves, pipes must be cleaned. It recommended before valve mounting filters, steam trap piping installation.
9, prior to installation, pay attention to see the product label, carefully read the instruction manual to determine whether the product meets the conditions of use.
10, before and after the steam solenoid valve pressure gauge to be installed on the pipe, in order to observe the pipeline pressure.
 
Founded in 1965, Yuyao No.4 Instrument Factory has been a professional manufacturer of solenoid valves and has enjoyed an excellent reputation through the past more than 50 years in China.