Elastomeric Wall Coating Elastic Coating Pure Acrylic Brushed Paint
Same As 3Trees
Features:
1.Instant coating curing,no flow when used on the ceiling or
vertical face of construction. 2.No seam coating, good waterproof
performance; 3.Excellent physical performance; 4.High elongation,
no cracking after alternating heat and cold resistance; 5.Good
weather resistance.
Brushing Area:1 kilograms 8 square meters
Name | Elastic Coating Exterior Latex Wall Paint |
Main Raw Material | Acrylic |
Usage | Building Coating, Exterior Wall Paint |
MF | C3H4O2 |
Application Method | Roller, Brush, Spraying |
State | Liquid Coating |
Color | Customize |
Touch Dry | 30 Min |
Package Type | Iron Can In Paper Carton. |
Introduction:
Elastic coating is a kind of high solid and high elastic
composition coating made of advanced elastic
emulsion and high quality inorganic raw materials. It can
effectively cover the fine cracks in the wall
and is also the best choice for repainting the old wall.
Features:
• Prevention: It can prevent water and carbon dioxide from
penetrating into the wall, keep the
alkalinity of concrete forever, and solve the problem of steel
rusting.
• Waterproof, anti-freezing and temperature-resistant function: can
prevent water infiltration into the
wall, avoid cold and freeze to produce qualitative change,
excellent initial water resistance.
• Dirt resistance: The application of core-shell technology, soft
core interconnecting, hard core
outside. The soft core ensures the elasticity of the film, and the
hard core reduces the adhesion of the
film and improves the resistance to contamination.
• High weather resistance: resin coating made by three-dimensional
cross-linking reaction is highly
weather-resistant and can protect the appearance of buildings for a
long time.
• Other advantages: Strong adhesion, elegant luster, long-term high
elasticity, and solve pinhole
problems.
Application:
Building interior wall, exterior wall, line board, decorative
modeling, special modeling, etc.
Applicable base surface:
Cement mortar surface, concrete surface, plasterboard, wood board,
all kinds of fiberboard, metal
plate, etc.
Surface requirements:
Cement base: use cement slurry or special putty to smooth
plastering surface defects or hollows.
Wood base: clean up, then spray oil seal primer.
Metal base: grind the base with 360# sandpaper, clean it with
appropriate chemical solvent, and then
coat with special primer.