Product Description
Summary:Ultrasonic cutting wayKnife type: the ultrasonic is loaded into the cutting tool, the
ultrasonic vibration with the cutting knife and to make cuttingThe principle of ultrasonic cuttingThe principle of ultrasonic cutting totally different from the
traditional sense of the cuttingUltrasonic cutting use the energy of the ultrasonic transducer, it
will be cut material of local heating melt, so as to achieve the
aim of cutting materials. The ultrasonic cutting does not require
sharp blade, also do not need a lot of pressure, it can not cause
collapse edge and material damage. At the same time, due to the
ultrasonic vibration cutting knife doing, small friction
resistance, by cutting material is not easy to stick on the blade
.The viscous and elastic material, frozen, such as food, rubber,
etc., or inconvenience to add pressure to cutting the object,
particularly effective. Ultrasonic cutting have a big advantage and
is at the same time of cutting, the cutting part has the fusion
effect. Sealing side effect, prevent was cut loose material
organization. The purpose of the ultrasonic cutting machine also
can be extended, such as digging hole, digging, scraper painting,
sculpture, slitting machine, and so on.The characteristics of the ultrasonic cuttingSquared rangeAll kinds of textile material can be cut by ultrasonic. Such as
natural fiber, synthetic fiber, including aromatic poly phthalein
amine fiber, carbon fiber and glass fiber woven fabric, non-woven
fabrics and knitted fabrics can be cut by ultrasonicNo pollutionWhen Ultrasonic is cutting, the equipment only heated to a
temperature of about 50 ºC, won't produce smoke and smell, also ruled out cutting damage and
danger of the fire.High reliabilityUltrasonic generator work would produce electromagnetic vibration
of 20 a 40 KHZ, and through the piezoelectric ceramic into
mechanical oscillation. This vibration transmitted to ultrasonic
cutting knife and cutting materials, and from its internal fever,
mechanically divided the material again. In contrast to the hot
cutting, ultrasonic using mainly instead of heat energy, mechanical
energy of ultrasonic cutter wear small.Cutting neatly squaredCutting edge is very neat, the fabric warp and weft are not shift
or out.Available in stenter and cylinder of fabric cutting machine with up
to 10 m/min speed of cotton and viscose fabrics for clipping.To cut the thermoplastic material, and fiber or fiber after entering
ultrasonic workspace, the edge will fusion.Function and parametersWorking power | 220V, 50HZ, 5A |
Maximum rated power | 500Watt |
Matched transducer | LK28-H38-Z4 |
Frequency tracking range | 28KHz + 400Hz |
Working environment:Indoor use, humidity: less than or equal to 85%RH; ambient
temperature: 0 ~40 OC
The machine should have plenty of space, not less than 150mm, in
order to heat dissipation.
If you need this product , please contact me :
Email :cathy.machinery01@vip.163.com