Dyn11 0.4KV Compact Transformer Substations Unit Substation Transformer 5%

Combined Transformer for Wind Power Generation, Wind Power Transformer

Product Description

ZGS-Z.F-□/35 series wind power combined transformer is a special power equipment integrating step-up transformer, HV current limited fuse, load switch, LV switch and related auxiliary equipments. It transforms the 0.69kV voltage produced by wind power motor into 35kV, and output the electricity through 35KV cable circuit, which is the ideal equipment in wind power complete set equipment.

Combined Transformer for Wind Power Generation, Wind Power Transformer​ Specification designation

Combined Transformer for Wind Power Generation, Wind Power Transformer Normal ambient conditions for service

1. Altitude shall be within 2000m
2. Ambient temperature range shall be : -40℃~+40℃
3. Outdoor wind speed shall not exceeds 35m/s
4. Relative humidity: daily average value shall not exceed 95%, monthly average value 90%
5. Installation site: indoor
6. Service environment: installed in sites with no fire or explosion danger, serious fifth, chemical corrosion and fierce vibration.
7. When transcend the above normal ambient conditions for service, users can negotiate with us to solve.

Combined Transformer for Wind Power Generation, Wind Power Transformer Product executive standards

JB/T10217-2000 Combined transformer

GB4208-2003 Protection degree of enclosure (IP code) (eqv IEC 60529:2001)

GB1094.1-1996 General rules of Power transformer

GB1094.2-1996 Temperature rise of power transformer

GB1094.3-2003 Power transformer Chapter 3: Insulation level/ intulation test and outer-insulation air clearance

GB1094.5-2003 Power transformer Chapter 5: Short-circuit withstand capability

GB/T6451-1999 Requirements on technical parameters of oil-immersed power transformer

GB3804-1990 3-63kV AC HV load switch

GB/T15166.2-1994 AC HV fuse current-limiting fuse

GB/T14048.1-1993 General rules of LV switchgear and control equipment